曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
173.265 Off-shore installations
(1) This regulation applies to an authorised designer who is authorised to
carry on design work on a terminal instrument flight procedure that:
(a) is of a type covered by the authorisation; and
(b) is for use by Australian aircraft operating under the IFR at, or in
the vicinity of, an off-shore installation located no closer than 30
nm from the nearest land.
(2) The authorised designer must ensure that a copy of each terminal
instrument flight procedure designed under the designer’s procedure
design authorisation is given to CASA.
(3) The authorised designer must ensure that a terminal instrument flight
procedure designed under the designer’s procedure design
authorisation does not require the use of a ground-based radionavigation
aid other than one that is operated and maintained by a
person certificated to do so under Part 171.
173.270 Maintenance of terminal instrument flight procedures
(1) Subject to subregulation (2), an authorised designer is responsible for
maintaining, in accordance with the standards for the maintenance of
terminal instrument flight procedures set out in the Manual of
Standards, a terminal instrument flight procedure designed under the
designer’s procedure design authorisation or a terminal instrument
flight procedure for which that responsibility is transferred to the
authorised designer under regulation 173.305.
(2) The authorised designer ceases to be responsible for the maintenance
of the procedure:
(a) if the authorised designer has notified CASA, under regulation
173.300, that the designer has ceased to have that responsibility:
(i) on the day when the notice is given; or
(ii) if a later day is specified in the notice — on the later day;
or
(b) if the authorised designer’s responsibility for the maintenance of
the procedure is transferred to a certified designer or another
authorised designer under regulation 173.305 — on the day when
the responsibility is transferred; or
(c) if the authorised designer has notified CASA, under regulation
173.295, that the designer has ceased to design the type of
terminal instrument flight procedure concerned:
(i) on the day when the notice is given; or
(ii) if a later day is specified in the notice — on the later day;
or
(d) if the authorised designer’s procedure design authorisation is
varied under Subpart 173.E to exclude that type of procedure —
on the day when the authorisation is varied; or
Civil Aviation Safety Regulations 1998 (CASR)
CASR – 1st Edition – January 2003 Office of Legal Counsel
Replacement Page – Amdt No. 6 – January 2004 Civil Aviation Safety Authority
Part 173 — 25
(e) if the authorised designer ceases to be an authorised designer —
on the day when the designer ceases to be an authorised designer.
173.275 Authorised designer to have sufficient personnel
An authorised designer:
(a) must employ a sufficient number of personnel to enable the
designer to carry on the activity authorised by the designer’s
procedure design authorisation in accordance with these
Regulations; and
(b) must ensure that those personnel:
(i) are suitably qualified and competent to perform their
duties; and
(ii) are trained in accordance with the Manual of Standards
and the designer’s operations manual.
173.280 Authorised designer to maintain reference materials
(1) An authorised designer must maintain reference materials of the kinds
specified in the Manual of Standards.
(2) An authorised designer must keep the reference materials up-to-date
and in a readily accessible form.
(3) Each employee of the authorised designer whose duties include
carrying on design work that is authorised under the designer’s
procedure design authorisation must have ready access to the
reference materials.
173.285 Authorised designer to keep documents and records
(1) An authorised designer must keep documents and records of the kinds
specified in the Manual of Standards.
(2) A document or record must be retained for as long as the Manual of
Standards specifies for the particular kind of document or record.
(3) The designer must, at CASA’s request, make the documents and
records, or copies of them or extracts from them, available for
inspection by CASA.
173.290 Authorised designer to have document and record control
system
(1) An authorised designer must establish, and put into effect, a system
for controlling documents and records relating to the activity
authorised under the authorised designer’s procedure design
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
澳大利亚CASR Civil Aviation Safety Regulations中(155)
