曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
173.050 Criteria for grant of procedure design certificates
For regulation 173.335, a person who has applied for the grant of a
procedure design certificate must, if the certificate is granted, be able to
comply with the requirements of Division 173.B.2.
Civil Aviation Safety Regulations 1998 (CASR)
CASR – 1st Edition – January 2003 Office of Legal Counsel
Replacement Page – Amdt No. 6 – January 2004 Civil Aviation Safety Authority
Part 173 — 9
173.055 Procedure design certificate
(1) If CASA grants a procedure design certificate to a person under
Subpart 173.E, CASA must state on the certificate:
(a) the person’s name and principal place of business; and
(b) the type or each type of terminal instrument flight procedure
covered by the certificate; and
(c) any conditions applicable to it; and
(d) the date when it comes into force; and
(e) any other information that CASA thinks should be included.
(2) CASA may issue a replacement certificate in place of one that
contains anything that is not, or is no longer, correct or has been lost
or destroyed.
173.060 Procedure design certificates subject to conditions
A certified designer must comply with any conditions of the procedure
design certificate.
173.065 How long procedure design certificate remains in force
(1) A procedure design certificate:
(a) comes into force on the date stated in it; and
(b) remains in force unless it is cancelled.
(2) However, the certificate is not in force during any period in which it
is suspended.
173.070 Variation of procedure design certificates
(1) If a certified designer wants to vary a procedure design certificate or a
condition of it, application must be made to CASA, under Subpart
173.E, for that purpose.
(2) The application must contain, or have with it, a copy of the proposed
variation.
(3) If CASA approves the application under Subpart 173.E, the variation
takes effect:
(a) if a day is specified in the written notice given to the applicant
under Subpart 173.E — on that day; or
(b) if no day is specified — on the day when the notice is given to
the applicant.
Civil Aviation Safety Regulations 1998 (CASR)
Office of Legal Counsel CASR – 1st Edition – January 2003
Civil Aviation Safety Authority Replacement Page – Amdt No. 6 – January 2004
Part 173 — 10
Division 173.B.2 Requirements to be complied with by certified
designers
173.075 Certified designer to maintain operations manual
(1) A certified designer must, at all times, maintain an operations manual
that meets the standards for operations manuals set out in the Manual
of Standards.
(2) A certified designer:
(a) must keep the manual in a readily accessible form; and
(b) must ensure that each employee of the designer whose duties
include carrying on design work under the designer’s procedure
design certificate has ready access to the manual; and
(c) must amend the manual whenever it is necessary to do so to keep
it in an up-to-date form.
(3) A certified designer must ensure:
(a) that all amendments of the manual are incorporated in all copies
of the manual kept by the certified designer; and
(b) that copies of the amendments are given to CASA.
173.080 Compliance with operations manual
A certified designer must, in carrying on design work authorised under the
designer’s procedure design certificate, comply with the designer’s
operations manual.
173.085 Standards for design of terminal instrument flight procedures
etc
(1) A certified designer designing a terminal instrument flight procedure
under the certified designer’s procedure design certificate must ensure
that the procedure is designed in accordance with:
(a) any applicable standards set out or referred to in ICAO Doc.
8168 (PANS-OPS); and
(b) any applicable standards set out in the Manual of Standards.
(2) If, apart from this subregulation, a certified designer would be
required to ensure that a terminal instrument flight procedure is
designed in accordance with a standard set out or referred to in the
ICAO Doc. 8168 (PANS-OPS) and a standard set out in the Manual
of Standards, and it is not possible to comply with both standards, the
designer is only required to ensure that the procedure is designed in
accordance with the Manual of Standards.
Civil Aviation Safety Regulations 1998 (CASR)
CASR – 1st Edition – January 2003 Office of Legal Counsel
Replacement Page – Amdt No. 6 – January 2004 Civil Aviation Safety Authority
Part 173 — 11
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
澳大利亚CASR Civil Aviation Safety Regulations中(148)
