曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
173.305 Transfer of maintenance responsibility
Civil Aviation Safety Regulations 1998 (CASR)
CASR – 1st Edition – January 2003 Office of Legal Counsel
Replacement Page Amdt No. 11 – December 2004 Civil Aviation Safety Authority
Part 173 — 3
Subpart 173.D Performance of design work
173.310 Certified designer not to exceed the limitations of the designer’s procedure
design certificate
173.315 Authorised designer not to exceed the limitations of authorisation
Subpart 173.E Administration
Division 173.E.1 Application for, and grant of, procedure design certificates
and procedure design authorisations and related matters
173.320 Request for information
173.325 Other things CASA can ask applicant to do — interview
173.330 CASA may require demonstrations of equipment etc
173.335 Grant of procedure design certificate or procedure design authorisation
173.340 Material that CASA may or must take into account
173.345 CASA may grant certificate or authorisation subject to conditions
173.350 When decision must be made
173.355 Notice of decision
173.360 Return of certificate if procedure design certificate cancelled
Division 173.E.2 Variation of procedure design certificates and procedure
design authorisations
173.365 Applicability of this Division
173.370 Application for variation
Division 173.E.3 Directions to amend certified designer’s or authorised
designer’s operations manual
173.375 CASA may direct amendments to designer’s operations manual
Division 173.E.4 Suspension and cancellation of procedure design certificates
and procedure design authorisations
173.380 Suspension or cancellation of procedure design certificate or procedure
design authorisation by CASA
173.385 Cancellation at request of certified designer or authorised designer
Division 173.E.5 Authorised inspectors
173.390 CASA may appoint authorised inspectors
173.395 Identity card
173.400 Powers of authorised inspector
Subpart 173.A General
173.005 Applicability
(1) This Part:
(a) provides for the standards that apply to the design of instrument
flight procedures; and
(b) applies to the following persons:
(i) persons who want to become, or are, certified designers or
authorised designers of terminal instrument flight
procedures and certain employees of those persons;
(ii) persons who design instrument flight procedures other
than terminal instrument flight procedures.
Civil Aviation Safety Regulations 1998 (CASR)
CASR – 1st Edition – January 2003 Office of Legal Counsel
Replacement Page Amdt No. 11 – December 2004 Civil Aviation Safety Authority
Part 173 — 4
(2) This Part also sets out certain rules that apply to CASA in
administering procedure design certificates and procedure design
authorisations.
(3) Nothing in this Part applies:
(a) in relation to the design of terminal instrument flight procedures
for use by an aircraft in circumstances where one or more
engines of the aircraft become inoperative while it is on an IFR
flight; or
(b) to a person who carries on design work on such procedures.
173.010 Definitions for this Part
In this Part, unless the contrary intention appears:
AIS means:
(a) the body responsible for providing an aeronautical information
service under the Air Services Act 1995; or
(b) if another body is given that responsibility under another Act
having the same or similar effect — that body.
authorised designer has the meaning given by regulation 173.025.
certified designer has the meaning given by regulation 173.015.
chief designer, for a certified designer, means a person appointed as
chief designer for the certified designer under Division 173.B.3.
continental shelf means the continental shelf of Australia, within the
meaning of the Seas and Submerged Lands Act 1973.
design work, in relation to a terminal instrument flight procedure,
means any of the following work:
(a) designing the procedure or a part of the procedure;
(b) verifying, maintaining, reviewing or amending the procedure;
(c) supervising a person carrying on any work mentioned in
paragraph (a) or (b).
employee, of a certified designer or an authorised designer, includes a
person who carries on design work on a terminal instrument flight
procedure for the designer in the course of performing services for the
designer.
ICAO Doc. 8168 (PANS-OPS) means Doc.8168-OPS/611 Volume II
(Procedures for Air Navigation Services – Construction of Visual and
Instrument Flight Procedures) approved and published by decision of
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
澳大利亚CASR Civil Aviation Safety Regulations中(145)
