(2)
Complete and currentinspection records showing that allinspections and tests required to ensure compliance with this part have been properly completed and documented.
(b)
Retention of records. The manufacturer shall retain the records described in para-graph(a)(1)of this section untilit nolonger manufactures the article.At that time, copies of these records shall be sent to the Administrator. The manufacturer shall retain the recordsdescribedinparagraph(a)(2) of this sectionfor aperiod of at least 2 years.]
Amdt. 21-50, E.. 9/9/80
FAR21.615 :[FAAinspection.]
[Upon the requestof the Administrator, each manufacturer of an article under aTSO authorization shall allow the Administrator to–
(a)
Inspect any article manufactured under that authorization;
(b)
Inspectthe manufacturer’squality control system;
(c)
Witness any tests;
(d)
Inspectthe manufacturing facilities; and
(e)
Inspect the technical data .les on that article.] Amdt. 21-50, E.. 9/9/80
FAR21.617 :[Issue ofletters ofTSOdesign approval :import appliances.]
(a)
[A letter of TSO design approvalmay be issued for an appliance that is manufac-tured in a foreign country with which the United States has an agreement for the acceptance of these appliances for export and import and that is to be imported into the United States if–
(1)
The country in which the appliance was manufactured certi.es that the ap-pliance has been examined, tested, and found to meet the applicable TSO designated in Sec. 21.305(b) or the applicable performance standards of the country in which the appliance wasmanufactured and any otherperformance standards the Administrator may prescribe to provide a level of safety equi-valent to that provided by the TSO designated in Sec. 21.305(b); and
(2)
The manufacturer has submitted one copy of the technical data required in the applicable performance standard through its civil aviation authority.
(b)
The letter of TSO design approval will be issued by the Administrator and must list any deviation granted to the manufacturer under Sec. 21.609.
(c)
After the Administrator has issued a letter of TSO design approval and the country of manufacture issues a Certi.cate of Airworthiness for Export as speci.ed in Sec. 21.502(a), the manufacturer shall be authorized to identify the appliance with the
′
Elodie Roux. Septembre 2003
Subpart O–Technical Standard Order Authorizations
TSO marking requirements described in Sec. 21.607(d) and in the applicable TSO. Each appliance must be accompanied by a Certi.cate of Airworthiness for Export as speci.ed in Sec. 21.502(a) issued by the country of manufacture.]
Amdt. 21-50, E.. 9/9/80
FAR21.619 :[Noncompliance.]
[The Administrator may, upon notice, withdraw the TSO authorization or letter of TSO design approval of any manufacturer who identi.es with a TSO marking an article not meeting the performance standards of the applicable TSO.] Amdt. 21-50, E.. 9/9/80
FAR21.621 :[Transferability andduration.]
[A TSOauthorization or letter of TSO design approval issued under this Part is not transferable and is e.ective until surrendered, withdrawn, or otherwise terminated by the Administrator.] Amdt. 21-50, E.. 9/9/80
Cinqui`eme partie
FAR 23-Airworthiness standards : Normal, utility, acrobatic, and commuter category airplanes
217
Table des mati`eres
28 Subpart A : General 223
29 Subpart B : Flight 227
29.1General ..................................... 229
29.2Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
29.3FlightCharacteristics ............................. 243
29.4Controllability andManeuverability . . . . . . . . . . . . . . . . . . . . . 243 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：FAA规章 美国联邦航空规章 Federal Aviation Regulations 1(116)
