(31)
Make sure the airplane is grounded correctly (AMM 20-41-00/201).
S 495-093
(32)
Connect a grounding cable from the fueling source and other fuel equipment being used for tank maintenance to an approved and identified static ground.
S 495-095
(33)
Connect a bonding cable from the fueling vehicle to an approved electrical grounding or bonding connection on the airplane.
NOTE: If the fueling vehicle has a permanently attached V or Y
____ grounding cable, connect one part of the V or Y to an approved identified ground. Then connect the other part of the V or Y cable to an approved electrical bonding or grounding point on the airplane.
S 495-096
(34)
Attach the fueling nozzles to the fueling adapters (AMM 12-11-01/301).
S 655-022
(35)
Refuel the airplane (AMM 12-11-01/301).
S 865-023
(36)
Put the RIGHT MAIN, CENTER, and LEFT MAIN fueling valve switches on the fueling control panel, P28, to the FUEL position (View B, Fig. 501).
S 215-024
(37)
Make sure the RIGHT MAIN, right CENTER, left CENTER, and LEFT MAIN OPEN fueling valve lights come on.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-21-00
ALL ú ú 02 Page 509 ú Jun 20/97
A
757 MAINTENANCE MANUAL
S 865-065
(38)
Push the TEST SYSTEM switch.
S 215-025
(39)
Make sure the RIGHT MAIN, right CENTER, left CENTER, and LEFT MAIN OPEN fueling valve lights go off.
S 865-066
(40)
Release the TEST SYSTEM switch.
S 865-067
(41)
Push the OVERFILL TEST switch.
S 215-026
(42)
Make sure the RIGHT MAIN, right CENTER, left CENTER, and LEFT MAIN OPEN fueling valve lights go off.
S 865-068
(43)
Push the OVERFILL RESET switch.
S 215-027
(44)
Make sure the RIGHT MAIN, right CENTER, left CENTER, and LEFT MAIN OPEN fueling valve lights come on.
S 865-028
(45)
Put the RIGHT MAIN, CENTER, and LEFT MAIN fueling valve switches to the OFF position.
