The second task is to install the drain valve and flapper assembly. The third task is to remove the drain valve.
NOTE: To remove the drain valve you do not have to go into
____
the applicable fuel tank.
The fourth task is to install the drain valve.
TASK 28-11-05-004-001
2. Remove the Sump Drain Valve and Flapper Assembly (Fig. 401)
________________________________________________
A. Equipment
(1)
Adapter, Sump Drain Valve R/I - B28001-1
Adapter, Main and Surge Tanks - B28001-2
Adapter, Center Tank - B28001-5
B.
References
(1)
AMM 06-41-00/201, Fuselage (Major Zones 100 and 200) Access Doors and Panels
(2)
AMM 28-11-00/201, Fuel Tanks (Purging and Entry)
(3)
AMM 28-11-01/401, Main Tank Access Door
(4)
AMM 28-11-03/401, Surge Tank Access Door
C.
Access
(1)
Location Zones 194 Wing to Body - Forward Lower Half (Right) 541 Main Tank - Rib No. 5 to No. 17 (Left) 543 Surge Tank - Rib No. 21 to No. 23 (Left) 641 Main Tank - Rib No. 5 to No. 17 (Right) 643 Surge Tank - Rib No. 21 to No. 23 (Right)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-05
ALL ú ú 01 Page 401 ú May 28/99
A
757
MAINTENANCE MANUAL
FLAPPER
FLANGE
TANK
DRAIN VALVE SUMP
FITTING
DRAIN VALVE SEE A
DRAIN VALVE SEE B 0-RING
SEE A
FLAPPER
VALVE LOWER
POPPET BODY SURFACE
VALVE OF FUEL TANK
DRAIN VALVE
A
FLAPPER LOWER SURFACE
VALVE OF FUEL TANKBODY
O-RING FLANGE
POPPET TANK
VALVE SUMPDRAIN FITTINGLINE 0-RING
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 燃油 CHAPTER 28 - FUEL 2(2)