钻石40飞机维护手册 DA 40 SERIES AMM 3(66)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

(4)  Move the engine control assembly fully into position in the floor panel. 
(5)  Install the engine control assembly front cover plate: S Move the cover plate into position on the engine control assembly. S Install the 2 hex-headed bolts which attach the cover plate and engine control assembly to the floor panel.  Do not tighten. 
(6)  Install the engine power control lever.  Refer to Section 76-11. 
(7)  Tighten the 2 hex-headed bolts in the front cover plate. 
(8)  Do a test for correct range, full and free movement of the cabin heat control system.  Refer to Section 21-01. 

Page 202 Doc # 6.02.01 09 Jan 2003 Rev. 4
31-11-00
Indicating Systems
AMM

%
%
%
%
%
%

%
%
%

Detail Steps/Work Items  Key Items/References 
(9)  Do a test for correct range, full and free movement of the cabin heat distribution system.  Refer to Section 21-01. 
(10)  Install the knob on the emergency fuel valve: S Install the mounting plate. S Push the knob onto the fuel valve selector shaft. S Install the cross-head screw which attaches the knob to the shaft. 

%

Doc # 6.02.01 Page 203
Rev. 4 09 Jan 2003

31-11-00
AMM

% Intentionally left blank
31-11-00
Indicating Systems
AMM

Section 31-20
Independent Instruments

1. General
This Section tells you about the digital chronometer which can be installed in the DA 40. Refer to the equipment manufacturers' manuals for more data about the equipment.
%  The Astrotech LC-2 digital chronometer or the Davtron M803 digital chronometer can be installed in the instrument panel of the DA 40.
2. Description
%  A. Astrotech LC-2 Digital Chronometer
% Figure 1 shows the Astrotech LC-2 digital chronometer. It is located in the instrument panel, see % Section 31-10.
The front of the Astrotech LC-2 digital chronometer consists of 3 buttons and an LCD with 4 digits. The background of the LCD is illuminated.
The chronometer has two functions:
) Clock function (time and date). The hours can be displayed in 12 hour format or 24 hour format.
) Chronometer function (stop watch, 24-hour capacity). The unit displays the minutes and seconds during the first hour, then the hours and minutes until 24 hours.
The chronometer is supplied with power by an internal 1.5 V AA battery. The lighting is supplied with power by the main bus.
Doc # 6.02.01 Page 1
Rev. 4 09 Jan 2003

31-20-00
AMM

LCD Display

Date/Advance-Start/Stop
Set/Reset Button
Button
Figure 1: Astrotech LC-2 Digital Chronometer
Page 2 Doc # 6.02.01 09 Jan 2003 Rev. 4
31-20-00
Indicating Systems
AMM

% B. Davtron M803 Digital Chronometer
% Figure 2 shows the Davtron M803 digital chronometer. It is located in the instrument panel, see % Section 31-10 or 31-11. Refer to Section 34-10 for more information about the OAT indication % functions of the unit.
% The front of the Davtron M803 digital chronometer consists of 3 buttons and an LCD. The % background of the LCD is illuminated.
% The chronometer has the following functions:
%) Clock function. The time can be displayed in 'Universal Time' format or 'Local Time' format.
%) Elapsed Timer Count Up. The unit displays the minutes and seconds during the first hour, then % the hours and minutes until 99 hours and 50 minutes.
%) Elapsed Timer Count Down. A count down from any time, a maximum of 59 minutes and 59 % seconds can be set.
%) Flight Time Alarm. The display will flash when the Flight Time equals the previous set alarm % time.
%) OAT/Volts. One button control steps sequentially through E, F, C. (E-Voltage (EMF), F-OAT % Fahrenheit, C-OAT Centigrade).
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：钻石40飞机维护手册 DA 40 SERIES AMM 3(66)