3. Remove/Install a Fuel Tank Probe
Obey the safety precautions for fuel at all times.
%
%
%
% A. Remove the Fuel Tank Probe from the Inboard Fuel Chamber
Detail Steps/Work Items Key Items/References
(1) Defuel the wing that has the fuel tank sensor that you will remove. Refer to Section 12-10.
(2) Remove the wing that has the fuel tank probe that you will remove, and support the wing on trestles. Refer to Section 57-10.
(3) Remove the fuel tank assembly from the wing. Refer to Section 28-10.
(4) Remove the probe from the threaded mounting.
% B. Install the Fuel Tank Probe to the Inboard Fuel Chamber
%
%
%
%
%
%
%
Detail Steps/Work Items Key Items/References
(1) Split inboard fuel chamber from outboard fuel chamber. Refer to Section 28-10.
(2) Install the probe into the inboard fuel chamber: S Apply sealant to the thread of the probe. S Carefully move the probe into position in the inboard chamber. Engage the thread. S Turn the probe clockwise, by hand, until the probe is fully engaged in its mount. S Tighten the probe. Use 'seal-lube' or 'fuel-lube'. Ensure that the probe goes into the guide at the outboard end of the fuel chamber. Torque 26 Nm (19.2 ft.lb).
(3) Re-connect inboard fuel chamber to outboard fuel chamber. Refer to Section 28-10.
(4) Install the fuel tank assembly into the wing. Refer to Section 28-10.
(5) Install the wing to the airplane. Refer to Section 57-10.
(6) Refuel the airplane. Refer to Section 12-10.
(7) Examine the fuel probe installation for fuel leaks.
(8) Install the access panel for the fuel tank. Refer to Section 52-40.
Doc # 6.02.01 Page 203
Rev. 4 09 Jan 2003
28-40-00
AMM
% The long range fuel chamber is part of the Long Range Tank (O.M 40-071). %
%
%
%
%
%
%
%
%
%
%
% C. Remove the Fuel Tank Probe from the Long Range Fuel Chamber
Detail Steps/Work Items Key Items/References
(1) Defuel the wing that has the fuel tank probe that you will remove. Refer to Section 12-10.
(2) Remove the wing that has the fuel tank probe that you will remove, and support the wing on trestles. Refer to Section 57-10.
(3) Remove the fuel tank assembly. Refer to Section 28-10.
(4) Disassemble the fuel tank assembly. Refer to Section 28-10.
(5) Remove the long range fuel probe from the threaded mounting.
% % % D. Install the Fuel Tank Probe to the Long Range Fuel Chamber
% % The long range fuel chamber is part of the Long Range Tank (O.M 40-071).
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
Detail Steps/Work Items Key Items/References
(1) Install the probe into the long range fuel chamber: S Apply sealant to the thread of the probe. S Carefully move the probe into position in the long range fuel chamber. Engage the thread. S Turn the probe clockwise, by hand, until the probe is fully engaged in its mount. S Tighten the probe. Use 'seal-lube' or 'fuel-lube'. Ensure that the probe goes into the guide at the outboard end of the fuel chamber.
(2) Assemble the fuel tank assembly. Refer to Section 28-10.
(3) Install the fuel tank assembly. Refer to Section 28-10.
(4) Install the wing to the airplane. Refer to Section 57-10.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:钻石40飞机维护手册 DA 40 SERIES AMM 3(55)