AMS provides a navigational calculator to perform cal-culations based on the active .ight plan and current condi-tions of groundspeed, position and time. It displays esti-mated time of arrival, estimated time enroute, range and fuel calculations. The CDU accesses the active .ight plan for data used for the navigation calculator functions of es-timated time of arrival, required groundspeed, and esti-
3-54 Change 3
TM 1-1520-253-10
SK.1
SK.2
SK.3
SK.4
SK.5 SK.6
SK.7
SK.8
SK.9
SK.10
SK.1
SK.2
SK.3
SK.4
SK.5
SK.6
SK.7
SK.8
SK.9
SK.10
SK.1
SK.2
SK.3
SK.4
SK.5
SK.6
SK.7
SK.8
SK.9
SK.10
AB0657
SA
TM 1-1520-253-10
SK.1
SK.2
SK.3
SK.4
SK.5 SK.7
SK.8
SK.9
SK.10
SK.6
SK.7
SK.8
SK.9
SK.10
SK.1
SK.2
SK.3
SK.4
SK.5
SK.1
SK.6 SK.1
SK.2
SK.7 SK.2
SK.6
SK.3
SK.8 SK.3
SK.4
SK.9 SK.4
SK.5
SK.10 SK.5
SK.6
SK.7
SK.8
SK.9
SK.10
AB0658
SA
mated duration of .ight. This data may be manually over-written by the pilot, as desired. The navigation calculator screens are accessed through a main menu, accessed by the CLC .xed function key.
3.12.5.1 Calculator Menu Screen. The menu screen provides access to the display and data entry screens. It is accessed by CLC .xed function key. The displays and functions of active soft keys are as follows:
CONTROL/ FUNCTION
INDICATOR
sETA Access EST TIME OF
ARRIVAL screen.
sREQ Access EST FUEL REQUIRED FUEL screen.
sREQ Access REQUIRED GS GROUNDSPEED screen.
sDURATION Access EST DURATION/ RANGE RANGE screen.
sRNG/BRG Access RANGE AND BEARING screen.
3.12.5.2 Estimated Time of Arrival Screen. The CDU calculates and displays the ETA at any waypoint in the active .ight plan. ETA is only displayed when all edit-able .elds contain data, and either FPN or DIRECT soft key is pressed. The ETA calculations are preformed based on:
a.
Either current helicopter groundspeed, or a pilot en-tered groundspeed.
b.
Either present position and time, or a pilot entered start waypoint and expected start time.
c.
Either great circle route direct to destination, or along the active .ight plan.
d.
The displays and functions of active soft keys are as follows:
CONTROL/ FUNCTION INDICATOR
gFR WPT Enter FROM waypoint number and name. When soft key is pressed, present position is displayed.
CONTROL/ INDICATOR FUNCTION
gTO WPT Enter TO waypoint number or
name.
gSTART TIME Displays system time. Press soft key to edit time to an expected start time.
ETE Displays estimated time enroute when all edit .elds contain data and FPN or DIRECT soft key is pressed.
ETA Displays estimated time of arrival when all edit .elds contain data and FPN or DIRECT soft key is pressed.
GSs Enter groundspeed. When soft key is pressed, current groundspeed is displayed.
FPNs Displays ETE and ETA based on .ying the active .ight plan. If either waypoint entered in FR WPT or TO WPT is not part of the .ight plan, annunciation of WPT NOT IN FPN is displayed in scratchpad, and there will be no display in ETE or ETA .elds.
DIRECTs Displays ETE and ETA as if .own as a direct to .ight plan.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：UH-60Q 直升机技术手册 直升机操作手册 1(91)
