STATUS/ SYMBOLOGY
Azimuth position
Elevation position
Digital gain and level indicators
Date
Time
Elevation graticule
Azimuth graticule
Highest priority thermal cue
Standard thermal cue
Narrow .eld of view size reticle
Line of sight crosshair
Current focus
FUNCTION
Displays the current azimuth position, in degrees, relative to the look-ahead position of the system.
Displays the current elevation position, in degrees, relative to the look-ahead position of system.
Displays the current gain and level settings in digital format.
Displays the current date in month-day-year format.
Displays the current time and indicates whether the time is set to zulu (Z) or local (L) time.
Provides a graphical representation of the present elevation position within the .eld of regard.
Provides a graphical representation of the present azimuth position within the .eld of regard.
Provides a graphical indication of the location of the target that will be tracked if the autotrack is activated.
Provide graphical indications of the locations within the .eld of view that the autotracker detects a potential target.
Indicates the size and location of the narrow .eld of view relative to the wide .eld of view.
Indicates the center of the .eld of view. The line of sight crosshair can also be used to estimate range to an object.
Displays the current focus position within the available focus range. The left end of the scale indicates near focus and the right end of the scale indicates in.nity focus.
Pages 4-26 through 4-28 deleted. Figures 4-9 though 4-13 deleted.
Change 4 4-25/(4-26 Blank)
STATUS/ FUNCTION
SYMBOLOGY
Current dynamic Indicates the dynamic display range
display range or and the level offset derived from
zoom setting the Gain/Level/DC restoration
settings for the IR sensor or the
current zoom position of the TV
sensor. For the IR sensor the width
of the highlighted bar indicates the
dynamic range. The position of the
highlighted bar within the scale
indicates the level offset.
4.6.7 POWER UP AND MODE SET Operation.
1.
Cycle FLIR control panel POWER switch -ON.
2.
Allow approximately 3 minutes for FLIR to complete the auto self-test BIT cycle, cool up period and auto cage.
3.
Gain as desired or press AUTO GAIN button.
4.
Polarity as desired, press POLARITY button.
NOTE
Focusing the FLIR initially in the 2X ZOOM .eld of view automatically sets focus for the NFOV and WFOV modes.
5.
FOV set to 2X ZOOM and adjust focus FOC OUT/IN.
6.
FOV -WFOV.
7.
MENU button press.
8.
Menu SYM hook, set day or night mode, exit HOOK.
9.
Hook menu CONFIG, day/night symbology hook -Set as desired to change bright/dim in-dications of status bar, reticle, and misc. sym-bology.
10.
Exit MENU.
4.6.8 Stopping Procedure. Using the menus place the system in STOW. The TFU will slew to the STOW posi-tion and the system is ready for shutdown. To shutdown the system turn OFF the system PWR switch.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：UH-60Q 直升机技术手册 直升机操作手册 1(134)
