CONTROL/ INDICATOR FUNCTION
HIDE Acknowledges new caution legend and changes its display from reverse video to normal text. If no new caution legend, removes window and displays C/A WNDW.
f Scrolls list down.
BRT knob Variable brightness adjustment.
4.5.2 Stand Alone Display Modes. Display modes are divided into stand alone displays, and overlay displays. Pressing the associated .xed function button displays the mode. Pressing the button a second time turns the display off, reverting to a blank screen.
4.5.2.1 Attitude Display Mode.
NOTE
Attitude information is for reference only, and not to be used in place of primary .ight instruments.
Displays an attitude indicator, giving pitch, roll, heading and course deviation.
4.5.2.2 Hover Display Mode. Displays helicopter’s ground speed and direction, radar altitude, and wind speed and direction.
4.5.2.3 Flight Plan Display Mode.
NOTE
Navigation information is for situational awareness, and is not to be used a primary means of navigation.
Gives graphic display of avionics management system (AMS) active .ight plan. The scale of display is variable, and marked by range rings. The heading up display orients the display to the helicopter’s heading, The north up dis-play orients the display to magnetic north.
4.5.3 Overlay Display Modes. Overlay displays may be either shown alone, or overlaid on the three stand alone displays described above.
4.5.3.1 FLIR Display Mode. NOTE
Selecting FLIR mode when FLIR is not in-stalled will cause MFD to .icker or cycle. To cleaar this condition, press FLIR again.
Displays FLIR video and command menus. See para-
graph 4.6 for displays and indications.
4.5.3.2 C/A Popup Display Mode. Displays active caution and advisory legends. Caution legends are sepa-rated from advisories by a row of white asterisks.
4.5.3.3 Flight Display Mode. NOTE
Navigation information is for situational awareness, and is not to be used a primary means of navigation.
Displays waypoint and destination data with magnetic heading and estimated time enroute (ETE), true or indi-cated airspeed, groundspeed and radar altitude.
4.5.3.4 Communications Display Mode. Displays pi-lot and copilot selected COMM radio preset, band, fre-quency, and call sign. If COMM is pressed when .ight data screen is displayed, radar altitude is removed, and radio setting is displayed in its place.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:UH-60Q 直升机技术手册 直升机操作手册 1(127)