RECOVERING IDEAL PROFILE
If the airplane is below profile in the OPEN DES case, the simplest way of regaining the profile is to use V/S. Once on the profile again, adjust rate of descent accordingly, with speed, V/S changes or OPEN DES.
If high on profile in the OPEN DES case, speed may be increased (with the permission of ATC), or drag used. Note that in DES mode, if drag is used when attempting to steepen profile, the airplane will apply power to offset the drag and maintain the ideal profile. Thus, to increase descent rate, OPEN DES must be selected and drag used, ensuring that thrust remains at idle.
EXPEDITE DESCENT (A320 only)
Another option is to use the EXPED pb which will command target speed close to MMO/VMO. This will give a very high rate of descent and its use must be closely monitored.
OVERVIEW
In all modes the ideal profile is tracked by the VDEV indicator on the PFD. It is important at all times to bear in mind terrain and MEA considerations. The procedure for terrain checking is especially important with thrust at idle. Bear in mind the drill for recovery from GPWS warnings QRH 1.08 (GPWS Warning).A rule of thumb calculation for descent is that track miles to run should equal three times your height in thousands of feet. Exact figures are given in QRH 4.10.
The effects of engine and wing anti-ice on descent profile can be marked, as the idle N1/EPR is increased, thus giving a shallower descent profile. If already in the descent, and anti-ice is used, it is usual to see an increase in speed in DES mode. If speed increases to the upper bracket, speedbrake can be used. If in OPEN DES mode a higher selected speed is advisable. Alternately, in OPEN DES mode, half speedbrake will counteract the effects of anti-ice. Conditions requiring the use of anti-ice are listed in FCOM 3.04.30 (Supplementary Techniques - Ice and Rain Protection).
It is vital to know the operating mode of the thrust system, particularly with regard to CFIT.
Weather radar use in the descent is covered in FCOM 3.03.17(SOPs - Descent).
06 - COMPLETION STANDARDS
.
Uses the correct method to initiate descent.
.
Monitors descent according to expected navigation.
.
Maintains heading +/-5 and speed +/-10 kts.
.
Adjusts descent rate using appropriate methods bearing in mind aircraft limitations and passenger comfort.
.
Complies with all ATC clearances and minimum safe altitudes.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320/A321 FLIGHT CREW TRAINING MANUAL 机组训练手册(30)