S 862-017
(2)
Put the passenger seat in the correct position in the seat track.
S 822-018
(3)
Push the shear pin lever on the rear seat leg until the shear pin lever engages tightly on the seat track (Figure 202).
S 422-089
(4)
Tighten the stud nuts.
S 422-090
(5)
Tighten the anti-rattle set screw.
S 422-091
(6)
Install the covers to the rear seat track.
S 422-092
(7)
Install the cover to the front seat track.
S 822-022
(8)
Refer to the Adjust the Passenger Seat procedure if it is necessary to adjust the recline and lock mechanism.
TASK 25-25-01-002-024
4. Remove the Recline and Lock Mechanism (Fig. 201)_____________________________________
A. Access
(1) Location Zones
200 Upper Half of Fuselage
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-25-01
ALL ú ú 03 Page 213 ú Sep 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
B. Procedure
S 022-020
(1) Remove the seat bottom cushion.
NOTE: Velcro tape is used to attach the seat bottom cushion.
____
S 022-096
(2)
Remove the pin from the lock yoke which is below the seat bottom.
S 022-027
(3)
Remove the recline control from the recline and lock mechanism.
S 022-097
(4)
Remove the nuts and washers from the recline and lock mechanism (Figure 201).
S 022-008
(5)
Remove the recline and lock mechanism.
S 022-098
(6)
If you install a new recline and lock mechanism, remove the yoke.
TASK 25-25-01-402-030
5. Install the Recline and Lock Mechanism (Fig. 201)______________________________________
A. Access
(1) Location Zones
200 Upper Half of Fuselage
B. Procedure
S 422-099
(1)
Install the yoke on the new recline and lock mechanism.
S 422-100
(2)
Put the recline and lock mechanism in position. Install the nuts and washers (Fig. 201).
(3)
Attach the recline control to the recline and lock mechanism.
(4)
Adjust the set screw (Fig. 201).
(5)
Put the yoke in position and install the pin.
S 422-033
S 822-009
S 422-101
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-25-01
ALL ú ú 02 Page 214 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 422-035
(6)
Put the recline and lock mechanism in the correct position to get the seat back to the up position.
S 822-036
(7)
Refer to the Adjust the Passenger Seat procedure to adjust the recline and lock mechanism.
S 422-019
(8)
Install the seat bottom cushion.
NOTE: Velcro tape is used to attach the seat bottom cushion.
____
TASK 25-25-01-822-038
6. Adjust the Passenger Seat (Fig. 201)_________________________
A. Access
(1) Location Zones
200 Upper Half of Fuselage
B. Procedure - Adjust Recline Mechanism/Lock
S 822-039
(1) To adjust the recline and lock mechanism that has the hydrolok with C-clip, do the steps that follow:
(a)
Put the seat back in the up position.
(b)
Remove the seat bottom cushion.
NOTE: Velcro tape is used to attach the seat bottom cushion.
____
(c)
Move the plastic cover on the hydrolok on the spring.
(d)
Install the C-clip in the slot to get the correct reclined position.
S 822-040
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 1(69)
