EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-13-03
ALL ú ú 01 Page 403 ú Sep 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 024-033
(7)
Disconnect the electrical connector from the left bottom of the glareshield.
S 024-034
(8)
Disconnect the electrical connector fron the right bottom of the glareshield.
S 024-035
(9)
Remove the shims (View A).
S 024-036
(10)
Remove the screws on the top of the glareshield (View A).
S 024-037
(11)
Remove the screws on the left and right side of the glareshield (View A).
S 024-016
(12)
Move the glareshield aft while you lift the glareshield clear of the instrument panel.
TASK 25-13-03-404-017
3. Install the Glareshield (Fig. 401)_______________________
A. Consumable Materials
(1) C00259 Primer - BMS 10-11, Type I
B. Access
(1) Location Zones
211/212 Control Cabin - Section 41
C. Procedure
S 414-018
(1)
Put the glareshield in position on the instrument panel.
(2)
Install the shims (View A).
(3)
Install the screws on the top of glareshield (View A).
(4)
Make sure the glareshield is level with the instrument panel.
S 824-022
(5)
If the glareshield is not level with the instrument panel, do the steps that follow:
S 424-038
S 424-039
S 214-021
(a) Remove the screws on the top of the glareshield.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-13-03
ALL ú ú 01 Page 404 ú Jan 20/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
(b) On the side of the glareshield that is high, remove a layer of the shim until the glareshield is level with the instrument panel.
S 824-023
(6) If the glareshield is level with the instrument panel, do the steps that follow:
(a)
Remove the screws on the top of the glareshield.
(b)
Remove the shims.
(c)
Apply the primer to the shims.
(d)
Install the shims at the position that they were removed from.
(e)
Install the screws on the top of the glareshield.
S 424-040
(7)
Install the screws on the left and right side of the glareshield (View A).
S 424-041
(8)
Connect the electrical connectors on the left bottom and the right bottom of the glareshield.
S 424-042
(9)
Install the antifogging flex tubing to the left windshield duct.
S 424-043
(10)
Install the antifogging flex tubine to the right windshield duct.
S 414-027
(11)
Do the steps that follow to close the P1-3 and P3-1 panels:
(a)
Release the stop on the tracks.
(b)
Let the panel move slowly to a closed position.
(c)
Engage the 1/4 turn fasteners to close the panel.
(12)
Latch the captain and first officer chart tables to the glareshield.
S 864-005
(13)
Remove the DO-NOT-CLOSE tags and close these circuit breakers on the P6 panel:
S 414-028
(a) 6G2, CLOCK TIME BASE L
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
25-13-03
ALL ú ú 01 Page 405 ú Sep 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 EQUIPMENT/FURNISHINGS 1(38)
