• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-11 09:23来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

COVER
BASE
MOUNTING SLEEVE DIODE/FUSE
MOUNTING LUG
CARD
MOUNTING SCREW
SCREWDRIVER
INDICATOR LIGHT ASSEMBLY REMOVAL (EXAMPLE)
DIODE/FUSE CARD REMOVAL
(EXAMPLE)

B
Indicator Light
Figure 201

C31200
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 33-12-02
 ALL  ú ú 01 Page 202 ú Jun 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 032-070
 CAUTION:_______USE ONLY YOUR FINGERS TO PULL OUT THE LENS CAP ASSEMBLY. TOOLS CAN CAUSE DAMAGE TO THE LENS CAP.
 (4)  Carefully pull out the lens cap assembly.
 (a)  
Hold the sides of the lens cap assembly between your fingers.

 (b)  
With a side-to-side movement, pull the lens cap assembly out until it releases.


 NOTE: When the lens cap assembly is fully extended, it
____ releases suddenly. Do not let it hit the slide-mechanism-stops.
 (c)  Turn down the lens cap.
 S 962-055
 (5)  
Replace the lamp.

 S 432-073

 (6)  
Carefully push in the lens cap assembly.

 (a)  
Turn up the lens cap.

 (b)  
Push the lens cap assembly straight back until it locks into its position.

 (c)  
Close these circuit breakers and remove the DO-NOT-CLOSE tags:

 


 1)  P6 Main Power Distribution Panel a) 6D19 FLT DK LIGHTS PILOTS MISC IND 1 b) 6F20 FLT DK LIGHTS PILOTS MISC IND 2 c) 6F26 FLT DK LIGHTS F/O IND d) 6F27 FLT DK LIGHTS F/O IND & DIG DISP e) 6L4 FLT DK LIGHT CAPT IND f) 6L5 FLT DK LIGHT CAPT IND & DIG DISP
 S 712-013
 (7)  Do a test of the lamp:
 (a) Put the IND LTS switch on the P5 panel to the TEST position.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 33-12-02
 ALL  ú ú 01 Page 203 ú Oct 18/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 (b)  Make sure the replaced lamp comes on.
 NOTE: If the two lamps in the indicator light do not come
____ on, use an eraser to clean the contacts on the diode/fuse card. To make sure the contacts in the center of the base assembly move freely, carefully push the contacts with a wooden dowel.
 (c)  Put the IND LTS switch to the BRT position.
 S 862-062
 (8)  Remove electrical power if it is not necessary
 (Ref 24-22-00/201).

 TASK 33-12-02-002-014
 3.  Diode/Fuse Card Replacement (Indicator Light) (Fig. 201)_____________________________________________
 A. References
 (1)  
24-22-00/201, Manual Control

 (2)  
SSM 33-12-01


 B. Access
 (1)  Location Zone 200 Flight Compartment, Pilots' Instrument Panels
 C. Procedure
 S 862-015
 (1)  Open these circuit breakers and attach DO-NOT-CLOSE tags:
 (a)  P6 Main Power Distribution Panel 1) 6F19 FLT DK LIGHTS PILOTS MISC IND 1 2) 6F20 FLT DK LIGHTS PILOTS MISC IND 2 3) 6F26 FLT DK LIGHTS F/O IND 4) 6F27 FLT DK LIGHTS F/O IND & DIG DISP 5) 6L4 FLT DK LIGHT CAPT IND 6) 6L5 FLT DK LIGHT CAPT IND & DIG DISP
 S 032-071
 CAUTION:_______USE ONLY YOUR FINGERS TO PULL OUT THE LENS CAP ASSEMBLY. TOOLS CAN CAUSE DAMAGE TO THE LENS CAP.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 33-12-02
 ALL  ú ú 01 Page 204 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

 (2)  Carefully pull out the lens cap assembly.
 (a)  
Hold the sides of the lens cap assembly between your fingers.

 (b)  
With a side-to-side movement, pull the lens cap assembly out until it releases.


 NOTE: When the lens cap assembly is fully extended, it
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:747-400 AMM 飞机维护手册 灯 LIGHTS(26)