• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-25 17:44来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 

R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 32-11-11-600-050-C
 A. Restoration of Main Gear
 (1)
 Refer to the MLG leg assembly Component Maintenance Manual (Ref. CMM 32-12-25) to put the MLG leg assembly back to a serviceable condition.

 (2)
 Refer to the MLG side-stay assembly Component Maintenance Manual (Ref. CMM 32-12-26) to put the MLG side-stay assembly back to a serviceable condition.


 **ON A/C 301-399,
 Subtask 32-11-11-600-050-D
 A. Restoration of Main Gear
 (1) Refer to the MLG leg assembly Component Maintenance Manual (Ref. CMM 32-12-22) to put the MLG leg assembly back to a serviceable condition.
 1EFF : ALL 1 32-11-11Page 495 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-11-11Page 496 1 1 May 01/04 1 1 1CES 1 LEG ASSY - MLG (2501GM,2502GM) - INSPECTION/CHECK


R R R  (2) Refer to the MLG side-stay assembly Component Maintenance Manual (Ref. CMM 32-12-13) to put the MLG side-stay assembly back to a serviceable condition.
 **ON A/C ALL
 5. Close-up________
 Subtask 32-11-11-410-054
 A. Close Access
 (1) Install the MLG leg assembly (Ref. TASK 32-11-11-400-001).
 (2) Install the MLG side-stay assembly (Ref. TASK 32-11-16-400-001).
 (3) Install the MLG brakes (Ref. TASK 32-42-27-400-001).
 (4) Install the MLG wheels (Ref. TASK 32-41-11-400-006).
 Subtask 32-11-11-942-051
 B. Removal of Equipment
 (1) Remove the safety barriers.
 (2) Remove the warning notice(s).
 (3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

 

_________________________________________________
R TASK 32-11-11-200-001 Check Fluid Level on Reservoir Indicator of Torque Link Damper WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
 START A TASK ON OR NEAR:

 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1.
 Reason for the Job

__________________
 Refer to the MPD TASK: 321111-03


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
 No specific warning notice

 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-026  GB DEF-STAN 68-148/1
 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)
 Material No. 19-003 USA AMS 3819
 LINT-FREE COTTON CLOTH (Ref. 20-31-00)

 1EFF : ALL 1 32-11-11Page 601 1 1 May 01/05 1 1 1CES 1


 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 12-12-32-611-006 Replenishment of the MLG Torque Link Damper (for corrective action) 32-11-11-991-010 Fig. 601
 3. Job Set-up
__________
 Subtask 32-11-11-941-054
 A. Safety Precautions
 (1)
 Put the safety barriers in position.

 (2)
 Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).

 (3)
 On the panel 400VU:


 -make sure that the landing-gear control-lever 6GA is in the DOWN position
 -put a warning notice in position to tell persons not to operate the landing gear.
 Subtask 32-11-11-110-051
 B. Cleaning
 (1) If necessary, clean the level indicator lines of the torque link damper with a clean MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026).
R 1EFF : ALL 1 32-11-11Page 602 1 1 May 01/05 1 1 1CES 1


 4. Procedure
_________
 (Ref. Fig. 601/TASK 32-11-11-991-010) Subtask 32-11-11-210-057
 A. Check Fluid Level on Reservoir Indicator of Torque Link Damper
 (1)
 Make sure that the level indicator shows a level between the REFILL line and the FULL line.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LANDING GEAR 起落架1(144)