WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking caps
No specific blanking plugs
No specific circuit breaker(s) safety clip(s)
No specific safety barriers
No specific thin-nose pliers
No specific warning notice
No specific warning notices
No specific adjustable access platforms 2 m (6 ft. 7 in.) R CFD1142-00-000 1 R CFD1142-10-000 1 R CFD1142-20-000 1 R CFD1142-40-000 1
460005835 1 GROUND LOCK SLEEVE
98D27803000000 1 LOCKING TOOL - FLAP/SLAT CONTROL LEVER
98D32104002000 1 EQUIPMENT - MLG R/I
98D32104002001 1 EQUIPMENT - MLG R/I
98D32104002002 1 EQUIPMENT - MLG R/I
1EFF : ALL 1 32-11-11Page 401 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
98D32104002003 1 EQUIPMT R/I MLG
98D32104005000 1 SPANNER-MLG REAR PINTLE
98D32104010000 1 INTERFACE BRACKET
98D32104010001 1 BRACKET ASSY I/FACE
98D32104080000 1 SPANNER - MLG REAR PIN
98D32104190001 1 TOOL - R/I (MLG FWD AND REAR PINTLE PINS)
98D32104190002 1 TOOL - R/I (MLG FWD AND REAR PINTLE PINS)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power 27-50-00-866-008 Extension of the Flaps on the Ground 27-54-45-000-004 Removal of the Torque Shaft 6208CM(6258CM) 29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-23-00-860-001 Disconnection of the Isolation Coupling of the Power
Transfer Unit (PTU) 32-00-00-481-001 Installation of the Safety Devices on the Landing Gears 32-00-00-860-001 Flight Configuration Precautions with Electrical
Power 32-11-16-000-001 Removal of the MLG Side-Stay Assembly 2505GM, 2506GM 32-12-00-010-001 Open the Main Gear Doors for Access 32-12-13-000-001 Removal of the Secondary Hinged Fairing 32-12-14-000-001 Removal of the MLG Fixed Fairing Assembly 32-31-46-000-001 Removal of the MLG Actuating Cylinder 32-41-11-000-006 Removal of the MLG Wheel
(2649GM,2650GM,2651GM,2652GM) 32-42-27-000-001 Removal of the Brake (2641GM,2642GM,2643GM,2644GM) 32-11-11-991-006 Fig. 401
R **ON A/C 001-049, 051-061, 101-105, 201-203,
32-11-11-991-027 Fig. 402
1EFF : ALL 1 32-11-11Page 402 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
**ON A/C 301-399,
32-11-11-991-027-B Fig. 402A
R **ON A/C 001-049, 062-099, 101-149, 151-199, 201-299, 401-499, Post SB 32-1213 For A/C 001-049,101-105,201-203, 32-11-11-991-027-A Fig. 402B **ON A/C ALL
32-11-11-991-023 Fig. 403
32-11-11-991-013-A Fig. 404
32-11-11-991-014 Fig. 405
**ON A/C ALL
Post SB 32-1213 For A/C 001-049,101-105,201-203,
32-11-11-991-008 Fig. 406
**ON A/C ALL
3. Job Set-up
__________
Subtask 32-11-11-941-050
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the safety devices are installed on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing-gear control lever 6GA is in the DOWN position
-put the warning notice in position to tell persons not to operate the landing-gear.
1EFF : ALL 1 32-11-11Page 403 1 1 Aug 01/05 1 1 1CES 1
(4)
On the panel 110VU:
-put the warning notice on the GRAVITY GEAR EXTN handle to tell persons not to operate the landing-gear doors.
(5)
Put the warning notices in the cockpit to tell persons not to operate the brakes.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架1(117)
