R 1EFF : 001-049, 062-099, 101-149, 151-199, 1 32-11-11Page 432 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1 **ON A/C ALL
TASK 32-11-11-400-001
Installation of the MLG Leg Assembly
WARNING : MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE WARNING
_______ NOTICES ARE IN POSITION.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
CAUTION : WHEN YOU DO A MAINTENANCE TASK THAT USES COMMON GREASE, USE ONLY
_______ GREASES OF THE SAME SPECIFICATION (IT IS PERMITTED TO USE DIFFERENT BRANDS IF THEIR SPECIFICATIONS ARE THE SAME). DO NOT MIX GREASES THAT HAVE CLAY THICKENERS WITH GREASES THAT HAVE LITHIUM THICKENERS. THIS MIXTURE CAN CHANGE THE LUBRICATION PROPERTIES OF THE GREASE. IF YOU USE GREASES OF DIFFERENT TYPES (SPECIALLY THOSE WITH CLAY THICKENERS AND LITHIUM THICKENERS), DECREASE THE SERVICE INTERVALS OF THE AIRCRAFT (BY HALF, FOR EXAMPLE) SPECIFIED IN THE MAINTENANCE PLANNING DOCUMENT. DO THIS FOR APPROXIMATELY THREE OR FOUR SERVICES (REFER TO YOUR IN-SERVICE DATA TO FIND THE NUMBER OF SERVICES BEST ADAPTED TO YOUR AIRCRAFT).
1. Reason for the Job__________________
Self Explanatory
1EFF : ALL 1 32-11-11Page 433 1 1 Aug 01/05R 1 1 1CES 1
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific No specific No specific No specific No specific No specific
No specific
CFD1142-00-000 CFD1142-10-000 CFD1142-20-000 CFD1142-40-000
R D23080000 460005833 460005835 460007280 98D32104002000 98D32104002001 98D32104002002 98D32104002003 98D32104005000 98D32104010000 98D32104010001 98D32104080000 98D32104081000 98D32104180000 98D32104190001 98D32104190002 98D32203502000 98D57004009000
feeler gage
ground hydraulic cart
plastic string
safety barriers
adjustable access platforms 2 m (6 ft. 7 in.)
Torque Wrench : range 0.00 to 1.20 m.daN
(0.00 to 9.00 lbf.ft)Torque Wrench : range 2.00 to 20.00 m.daN
(15.00 to 150.00 lbf.ft)1111 1 GROUND SAFETY LOCK1 GROUND LOCK SLEEVE1 GROUND LOCK SLEEVE1 GROUNDLOCK SLEEVE1 EQUIPMENT - MLG R/I1 EQUIPMENT - MLG R/I1 EQUIPMENT - MLG R/I1 EQUIPMT R/I MLG1 SPANNER-MLG REAR PINTLE1 INTERFACE BRACKET1 BRACKET ASSY I/FACE1 SPANNER - MLG REAR PIN1 TOOL - SPHERICAL LOCATION1 TOOL-SPHERICAL LOCATION1 TOOL - R/I (MLG FWD AND REAR PINTLE PINS)1 TOOL - R/I (MLG FWD AND REAR PINTLE PINS)1 SAFETY PIN - NLG DOOR1 TOOL-PINTLE BEARING ALIGNMENT (MLG)
1EFF : ALL 1 32-11-11Page 434 1 1 Aug 01/05 1 1 1CES 1 B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004 USA MIL-PRF-23827 TYPE I
SYNTH.ESTER BASED GREASE HIGH PRESSURE
Material No. 04-022 (Ref. 20-31-00)USA MIL-PRF-81322 GRADE 2
SYNTHE.HYDROCARBON GREASE HIGH PRESSURE
Material No. 05-002 (Ref. 20-31-00)USA MIL-P-8116
Material No. 05-047 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00)C Z-11.904
Material No. 09-016 ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT) (Ref. 20-31-00)USA MIL-PRF-81733D TYPE II CLASS B
CORROSION INHIBITING FILLET CONSISTENCY
Material No. 09-018 (Ref. 20-31-00)USA AMS 3267/3 CORROSION INHIBITING LOW ADHESION SEALANT
Material No. 11-026 Material No. 15-008 (Ref. 20-31-00)GB DEF-STAN 68-148/1 SOLVENT GENERAL PURPOSE (Ref. 20-31-00)AIB TN 10138 TYPE II GRADE 2
CORROSION PREVENTIVE TEMPORARY PROTECTIVE COMPOUND
Material No. 16-016 (Ref. 20-31-00)C Z-12.383
Material No. 16-021 EXTERNAL DECORATION PAINT (Ref. 20-31-00)F ASNB70720
Material No. 19-003 FLEXIBLE POLYURETHANE (Ref. 20-31-00)USA AMS 3819
Material No. 19-010 LINT-FREE COTTON CLOTH (Ref. 20-31-00)USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
1EFF : ALL 1 32-11-11Page 435 1 1 Aug 01/05R 1 1 1CES 1
C. Expendable Parts -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ---------------------------------------- |IPC-CSN------------------------------
16 wire 32-11-05 06B-015
22 O-rings 32-11-05 06B-080
23 O-rings 32-11-05 06B-080
28 washer 32-11-11 66A-100
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架1(124)
