1EFF : ALL 1 32-11-00Page 801 1 1 Nov 01/04 1 1 1CES 1 C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
32-00-00-481-001 Installation of the Safety Devices on the Landing
Gears
32-12-00-010-001 Open the Main Gear Doors for Access
32-12-00-410-001 Close the Main Gear Doors after Access
CMM 32-11-32
R CMM 32-12-20 CMM 32-12-23
3. Job Set-up
__________
Subtask 32-11-00-941-066
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Make sure that the ground safety locks are on the landing gear (Ref. TASK 32-00-00-481-001).
(3)
On the panel 400VU:
-make sure that the landing-gear control-lever 6GA is in the DOWN position
-put a warning notice in position to tell persons not to operate the landing gear.
(4)
Put a warning notice in the cockpit, to tell persons not to operate the landing gear system.
Subtask 32-11-00-010-059
B. Get Access
(1)
If necessary, open the applicable main gear door (Ref. TASK 32-12-00-010-001).
(2)
Make sure that the GROUND LOCK SLEEVE (460005835) is on the applicable main gear door actuator.
(3)
If necessary, put an adjustable access platform adjacent to the applicable MLG.
1EFF : ALL 1 32-11-00Page 802 1 1 May 01/04 1 1 1CES 1
4. Procedure
_________
**ON A/C 001-003, 051-052,
Subtask 32-11-00-350-050-B
A. Do the Applicable Repair Procedure
(1)
Do the applicable repairs given in the CMM (Ref. CMM 32-11-32).
(2)
Use a clean MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026) to clean the area that you have repaired.
(3)
Use a clean lint-free cloth to dry the area.
(4)
Apply protective treatment to the repair as given in the CMM (Ref. CMM 32-11-32).
R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 401-499,
Subtask 32-11-00-350-050-C
A. Do the Applicable Repair Procedure
(1)
Do the applicable repairs given in the CMM (Ref. CMM 32-12-23).
(2)
Use a clean MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026) to clean the area that you have repaired.
(3)
Use a clean lint-free cloth to dry the area.
(4)
Apply protective treatment to the repair as given in the CMM (Ref. CMM 32-12-23).
1EFF : ALL 1 32-11-00Page 803 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-11-00Page 804 1 1 May 01/04 1 1 1CES 1 LEG ASSY - MLG (2501GM,2502GM) - REMOVAL/INSTALLATION
R **ON A/C 301-399,
R Subtask 32-11-00-350-050-D
R A. Do the Applicable Repair Procedure
R (1) Do the applicable repairs given in the CMM (Ref. CMM 32-12-20).
R R R (2) Use a clean MISCELLANEOUS (Material No. 19-003) made moist with CLEANING AGENTS (Material No. 11-026) to clean the area that you have repaired.
R (3) Use a clean lint-free cloth to dry the area.
R R (4) Apply protective treatment to the repair as given in the CMM (Ref. CMM 32-12-20).
**ON A/C ALL
5. Close-up________
Subtask 32-11-00-410-058
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Remove the access platform(s).
(3) If opened, close the MLG door (Ref. TASK 32-12-00-410-001).
Subtask 32-11-00-942-067
B. Removal of Equipment
(1) Remove the safety barriers.
(2) Remove the warning notice(s).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
_____________________________________________________
TASK 32-11-11-000-001
Removal of the MLG Leg Assembly
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架1(116)
