-
select the channel 2.
8. On the VTR 1 12MH:
-
you hear the VTR 1 video-program sound of the PRI channel,
-
you hear the VTR 1 video programsound of the SEC channel.
On the SCU 11MH:
-
the VTR and the SEC indicators come on and the display shows 1,
-
the monitor shows the VTR 1 video program.
On the SCU 11MH, ALL ZONES area:
-
the VTR and the PRI indicators comeon and the display shows 1,
-
the LED of the related PWR membraneswitch comes on.
At the same time in the cabin:
-
all HMDU 100MH move to the viewing position,
-
all HMDU show the same VTR 1 video program.
At the related PCU:
-
the sound 1 of the VTR 1 video program is heard over the headset,
-
the sound 2 of the VTR 1 video program is heard over the headset.
On the VTR 1 12MH:
R 1EFF : 106-149, 211-299, 1 23-36-00Page 518 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the STOP pushbutton switch,
9. On the VTR 1 12MH:
-push the EJECT pushbutton switch,
-remove the cassette.
10. On the VTR 2 13MH : CAUTION : DO NOT USE FORCE WHEN
_______ YOU PUT THE CASSETTE INTO THE VIDEO TAPE REPRODUCER.
-insert the video cassette, NOTE : Make sure that the arrow
____ on the upper side of the cassette points in the direction of the VTR 2 13MH.
-push the REW pushbutton switch,
-
the LED on the PLAY pushbutton switchgoes off,
-
the LED on the STOP pushbutton switch comes on,
-
the cassette stops,
At the same time on the SCU:
-
the video program and the video sound is cancelled.
At the same time in the cabin:
-
the video program and the video sound is cancelled.
On the VTR 1 12MH:
-
the cassette comes out.
On the VTR 2 13MH:
-
the LED on the REW pushbutton switch comes on,
-
the cassette rewinds,
-
the cassette stops automatically at the end,
-
the LED on the REW pushbutton switch goes off,
R 1EFF : 106-149, 211-299, 1 23-36-00Page 519 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the PLAY pushbutton switch.
11. On the SCU 11MH:
-
push the PREVIEW SELECT switch again and again for the selection of the VTR, 2 and PRI,
-
push the PREVIEW SELECT switch again and again for the selection of the VTR, 2 and SEC.
12. On the SCU 11MH, ALL ZONES area:
-push the SEL membrane switch again and again for the selection of the VTR, 2 and PRI.
-
the LED on the STOP pushbutton switch comes on,
-
the LED on the STOP pushbutton switchgoes off,
-
the LED on the PLAY pushbutton switch comes on.
On the SCU 11MH:
-
the VTR and the PRI indicators comeon and the display shows 2,
-
the monitor shows the VTR 2 videoprogram,
With the headset:
-
you hear the VTR 2 video program sound of the PRI channel,
-
you hear the VTR 2 video programsound of the SEC channel.
On the SCU 11MH:
-
the VTR and the SEC indicators come on and the display shows 2,
-
the monitor shows the VTR 2 video program.
On the SCU 11MH, ALL ZONES area:
-
the VTR and the PRI indicators comeon and the display shows 2.
At the same time in the cabin:
-
all HMDU 100MH move to the viewing position,
-
all HMDU show the same VTR 2 video program.
R 1EFF : 106-149, 211-299, 1 23-36-00Page 520 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
13. In the cabin, at a Passenger Control Unit (PCU): At the related PCU:
- select the channel 1, - the sound 1 of the VTR 2 video program is heard over the headset,
- select the channel 2. - the sound 2 of the VTR 2 video program is heard over the headset.
14. On the SCU 11MH, VTR CONTROL area: On the SCU 11MH, VTR CONTROL area:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM Communications 通讯2(62)
