13. On the SCU 11MH, on the key pad:
-push the SEL membrane switch.
14. On the SCU 11MH, on the key pad: NOTE : If the AMUX NO message
____ comes into view, go to the next step.
-
push the up or down arrow membrane switch to move the cursor to YES,
-
push the SEL membrane switch,
-
push the up or down arrow membrane switch to move the cursor to the AMUX.
15. On the SCU 11MH, on the key pad:
-push the SEL membrane switch.
16. On the SCU 11MH, on the key pad: NOTE : If the PRAM YES message
____ comes into view, go to the next step
-the cursor move to YES,
-YES replaces by NO.
On the SCU 11MH, on the monitor:
-
the PSCU CONFIG selection page comes into view with the following message AMUX NO or AMUX Yes.
On the SCU 11MH, on the monitor:
-
the cursor move to YES,
-YES replaces by NO.
On the SCU 11MH, on the monitor:
-the PSCU CONFIG page comes into view with the following message. PRAM YES or PRAM NO.
On the SCU 11MH, on the monitor:
R 1EFF : 106-149, 211-299, 1 23-36-00Page 308 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-
push the up or down arrow membrane switch to move the cursor to NO,
-
push the SEL membrane switch.
-
push the up or down arrow membrane switch to move the cursor to the PRAM.
17. On the SCU 11MH, on the key pad:
-push the SEL membrane switch.
18. On the SCU 11MH, on the key pad: NOTE : If the AIRSHOW NO message
____ comes into view, go to the next step.
-
push the up or down arrow membrane switch to move the cursor to YES,
-
push the SEL membrane switch,
-
push the up or down arrow membrane switch to move the cursor to the AIRSHOW.
19. On the SCU 11MH, on the key pad:
-push the ENTER membrane switch.
20. On the SCU 11MH:
-the cursor move to NO,
-NO replaces by YES.
On the SCU 11MH, on the monitor:
-
the PSCU CONFIG page comes into view with the following message. AIRSHOW NO or AIRSHOW YES.
On the SCU 11MH, on the monitor:
-
the cursor move to YES,
-YES replaces by NO.
On the SCU 11MH, on the monitor:
- on the PSCU CONFIG page the followingmessages come into the view: COMPLETED
PLEASE
CYCLE POWER
On the SCU 11MH:
R 1EFF : 106-149, 211-299, 1 23-36-00Page 309 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-push the pushbutton switch - the integral light of the MASTER MASTER POWER. POWER pushbutton switch goes off.
Subtask 23-36-00-970-052
C. Downloading from the Personal Computer Memory Card Tnternational
Association (PCMCIA) card
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the PES video System Control On the SCU 11MH:
Unit (SCU) 11MH:
-push the pushbutton switch MASTER POWER.
-the integral light of the MASTERPOWER pushbutton switch comes on,
-all LED come on while the SCU 11MH does the self test of the system,
-
the green LED SYSTEM TEST/PASS comes on when the self test is complete.
On the PES video SCU 11MH, on the monitor:
-
the PROGRAMMABLE PSCU page comes into view.
NOTE : Wait for a minimum of 3 minutes after the SCU power-on, then continue
____ with the procedure.
2. On the SCU 11MH, on the key pad:
-push CLEAR the membrane switch.
3. On the SCU 11MH, MODE SELECT area:
-push and hold the menbrane switch for 5 seconds.
4. On the SCU 11MH, on the key pad: On the SCU 11MH, on the monitor:
-
the AUTO MODE selection page comes into view.
On the SCU 11MH, on the monitor:
-
the MAINTENANCE MODE page comes intoview.
On the SCU 11MH, on the monitor:
R 1EFF : 106-149, 211-299, 1 23-36-00Page 310 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-
push four times the '9'
membrane switch.
-
push ENTER the membrane switch.
