曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
CANCELLING THE HEADING/TRACK PRESET FUNCTION
The pilot can cancel the heading preset by pushing the HDG/TRK selector knob back in again.
This makes the navigation mode engage or arm.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
Intentionally left blank
A330/A340 FLEET PRO-NOR-SRP-01-10 P 36/36
FCOM 19 AUG 10
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-15 P 1/4
FCOM 19 AUG 10
BEFORE PUSH BACK OR START
CHANGE OF RUNWAY
Applicable to:
PROCEDURE
PRESS the F-PLN key on the MCDU.
SELECT the LAT REV at origin.
SELECT the DEPARTURE prompt [1L].
SELECT the new RWY in use.
SELECT the appropriate SID and TRANS.
CHECK the resulting temporary F-PLN and INSERT it.
Scratchpad display the CHECK TAKEOFF DATA message, if the PERF TO page was already
filled in.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-15 P 2/4
FCOM 19 AUG 10
ENTER the new V1, VR, V2, FLEX TEMP (or derated level) or CONF, as appropriate.
Note: 1. If the previously selected SID is compatible with the new runway, it automatically
appears in the temporary flight plan. Any revision the pilot may have made to the
previous SID will not be transferred.
If the pilot still wants it, he has to reenter it.
2. If the takeoff runway is changed in the flight plan, the takeoff speeds and flex
temperature or derated level are erased and have to be reinserted.
CHANGE OF RUNWAY
Applicable to: ,
PROCEDURE
PRESS the F-PLN key on the MCDU.
SELECT the LAT REV at origin.
SELECT the DEPARTURE prompt [1L].
SELECT the new RWY in use.
SELECT the appropriate SID and TRANS.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-15 P 3/4
FCOM 19 AUG 10
CHECK the resulting temporary F-PLN and INSERT it.
Scratchpad display the CHECK TAKEOFF DATA message, if the PERF TO page was already
filled in.
ENTER the new V1, VR, V2, FLEX TEMP (or derated level) or CONF, as appropriate.
Note: If the previously selected SID is compatible with the new runway, it automatically appears
in the temporary flight plan. Any revision the pilot may have made to the previous SID will
not be transferred.
If the pilot still wants it, he has to reenter it.
TAKEOFF FROM INTERSECTION
Applicable to: ALL
Use RTOW or FCOM to revise takeoff parameters
PRESS the [PERF] key on MCDU
ENTER the takeoff shift
ENTER the new V1, VR, V2, FLX TEMP (or derated level), or CONF, as appropriate
Note: The insertion of the shift in takeoff position permits the system to make an accurate revision
to its navigation data at takeoff.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
Intentionally left blank
A330/A340 FLEET PRO-NOR-SRP-01-15 P 4/4
FCOM 19 AUG 10
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-20 P 1/2
FCOM 19 AUG 10
TAXI
FCU SELECTION FOR TAKEOFF
Applicable to: ALL
PROCEDURE
ENSURE that HDG – V/S modes are selected (change over pushbutton).
CONFIRM or SELECT the first cleared altitude
CROSS CHECK on PFD the target altitude
CONFIRM both FDs ON
FMA MODE CHECK
Applicable to: ALL
CHECK that the FMA CLB (or ALT) mode is armed on column 2.
Note: ALT (in blue or magenta) may be displayed instead of CLB if the FCU altitude or a
constraint is set at or below the acceleration altitude.
If a HDG/TRK was preset, NAV is disarmed.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-20 P 2/2
FCOM 19 AUG 10
SELECTING A NAVIGATION DISPLAY
Applicable to: ALL
SET the minimum range to display the first waypoint after departure, or as required for weather
radar.
SELECTING TAKEOFF DISPLAYS FOR PILOT'S AND COPILOT'S MCDU
Applicable to: ALL
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
SYSTEMS RELATED PROCEDURES - FMS
A330/A340 FLEET PRO-NOR-SRP-01-30 P 1/10
FCOM 19 AUG 10
TAKEOFF
MONITORING THE TAKEOFF
Applicable to: ALL
At power set (thrust levers in FLX or TOGA position)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A330/A340机组操作手册 FLIGHT CREW OPERATING MANUAL FCOM 9(179)
