曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
BackSpace
Enable/Disable Bitmap frame around instruments (Ctrl-Backspase to select for
positioning)
Ctrl-I Switches off displays, pressing it a second time makes them light up again
Primary Flight Display
V/B Increase/Decrease Decision Height (DH) (Ctrl-Shift-V resets DH to default)
Insert Switches display from hPa to Inches and back
Delete Sets QNH to STD (29.92/1013)
Home/End Increases/decreases QNH
D Flight Director On/Off Shift-A = Flight Director bar toggle
ND Modes
Ctrl-5, 6, 7 Distinct OFF, VORL, ADFL (inop if MCP is active)
Ctrl-8, 9, 0 Distinct OFF, VORR, ADFR (inop if MCP is active)
I
Toggles Waypoint information (ETA and Distance) in the ND for flight plan points
(DATA)
G, H Decrease, Increase MAP range
1 VOR toggle On/Off in MAP Mode (Ctrl-1 Off only)
2 NDB toggle On/Off in MAP Mode (Ctrl-2 Off only)
3 WPT toggle On/Off in MAP Mode (Ctrl-3 Off only)
4 ARPT toggle On/Off in MAP Mode (Ctrl-4 Off only)
5, 6, 7, 8, 9,
0
MAP Range 7.5, 12.5, 25, 50, 100, 200 NM
Ctrl-C, Ctrl-Shift-
Z
Switches TCAS Mode
Ctrl-O Overview Page
O Weather Radar On/Off
Project Magenta Revision: 12 March-08
79
Ctrl-R Terrain Display On/Off
Ctrl-G Terrain Mode Display: Lines, Grid, Triangles
Ctrl-H Terrain Colour Display: Altitude, Green, Delta Altitude
Alt-G Terrain Map Size Small/Step2, Large/Step2, Small/Step1, Large/Step2
T Changes the bottom of the ND from Fuel to Controls and vice versa
Engine Page
Ctrl-C Toggles the display of the controls (Extra Information, Elevator/Aileron position etc.)
Ctrl-V Toggles MCP value indication left of Engine display (If MCP is present)
Tab Switches to the next Engine display page.
Ctrl-S Toggles "No Smoking" indication
Ctrl-B Toggles "Fasten Seatbelts" indication
Settings RJ.INI
There are various items you can customize both within the program and in the program's INI file, RJ.INI.
Please check the RJ INI itself for the latest entries, they are self-commenting.
Project Magenta Revision: 12 March-08
80
Project Magenta Revision: 12 March-08
81
Project Magenta Instructor Station
The Instructor Station software is based on our experience with several of our other products and particular
requirements we would have to such an application.
The system requirements are identical to our Glass Cockpit software and the software can be used on a
single or dual monitor configuration, as well as networked on several computers. The network interfacing is
provided via WideFS/FSUIPC, a free license is included as part of the package. The Project Magenta
instructor station is compatible to FS2004, some features may not work with previous versions of flight
simulator.
We do rely on feedback from our customers regarding this and other products, please do not hesitate to
contact us with your questions or requirements. support@projectmagenta.com
There are two core modes of operation, full screen (with a map menu) or in map mode with the instructor
interface as an inset. To allow the map to be discernable, the interface is made transparent.
Instructor Station Full Screen Mode
Map Screen Mode is accessed via the command on the Main Instructor Menu page. The operation of the
Instructor Interface is identical in both modes, although some options might not be available in one or the
other mode.
Project Magenta Revision: 12 March-08
82
Instructor Station Map Screen Mode
Instructor Station Connectivity
The instructor station talks to the flight simulator via WideFS/FSUIPC. Once the connection is made, it can
be verified with the pmFileCheck Program in the root folder of the Instructor Station (pmInst).
Some conventions which are also applicable to our other software are shared folders which allow the
communication to the other software.
NetDir – Communication with the Project Magenta FMC
FSPLANS – Main FS Flight Plan Folder (if no FMC is used)
Please use pmFileCheck to verify the connection is as expected, make sure FS as well as any other
programs (FMC, Autopilot) are running when you make this test. The program will report and suggest
changes, if necessary.
Instructor Station Conventions
Both the Options Menu screen [Esc]-key and the INI file (pmInst.ini) are subject to change and will most
probably be expanded. The INI-File is self documenting, thus you should find a description of each setting
next to the particular entry. If something is unclear, please let us know and it will be changed accordingly.
The Options menu is accessible at all times, it allows you to control both map and instructor station options
as well as the appearance of the software.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料13(25)
