• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-10-29 12:39来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 c) 11J29, EICAS CMPTR RIGHT
 d) 11J30, EICAS LOWER IND
 e) 11J31, EICAS DSPL SW
 f) 11J32, EICAS PILOT DSPL


 (b)  
Remove the PDL interface cable from the connector on the front of the left (right) EICAS computer.

 (c)  
Close these circuit breakers and remove the DO-NOT-CLOSE tags:


 1)  On the P11 panel:
 a) 11J2, EICAS CMPTR LEFT
 b) 11J3, EICAS UPPER IND
 c) 11J29, EICAS CMPTR RIGHT

  ALL ú

 31-41-02
 ú ú 05 Page 206 ú Jan 28/01

A

757 MAINTENANCE MANUAL
 d) 11J30, EICAS LOWER IND
 e) 11J31, EICAS DSPL SW
 f) 11J32, EICAS PILOT DSPL

 (d) Return the airplane into a serviceable condition.
  ALL ú

 31-41-02
 ú ú 05 Page 207 ú Jan 28/01

A

757
MAINTENANCE MANUAL

 EICAS COMPUTER - REMOVAL/INSTALLATION
_____________________________________
 1.  General
_______
 A.  Two EICAS computers (M10181 - left, M10182 - right) are installed on rack E4-2 in the main equipment center. The front of the computers do not have system condition lights or BITE test buttons. All electrical connections are at the rear of the unit.
 B.  This procedure has two tasks. One is for EICAS computer removal; the other is for EICAS computer installation.
 C.  You will possibly have to install new software when you install the EICAS computer. You will possibly install the OPC. The OPS is the core software and will possibly not change.
 TASK 31-41-02-004-027
 2.  EICAS Computer Removal
______________________
 A.  References
 (1)  
AMM 20-10-01/401, E/E Rack-Mounted Components

 (2)  
AMM 20-41-01/201, Electrostatic Discharge Sensitive Devices


 B.  Access
 (1)  Location Zones
 119 Main Equipment Center
 211/212 Flight Compartment

 C.  Prepare for Removal
 S 864-003
 (1)  Open these circuit breakers on the overhead circuit breaker panel, P11, and attach DO-NOT-CLOSE tags:
 (a)  
11J2, EICAS CMPTR LEFT

 (b)  
11J29, EICAS CMPTR RIGHT


 D.  Procedure
 S 914-028
 CAUTION: DO NOT TOUCH THE EICAS COMPUTER BEFORE YOU DO THE PROCEDURE
_______ REMOVAL/INSTALLATION OF ESDS METAL UNITS (AMM 20-41-01/201). ELECTROSTATIC DISCHARGE CAN DAMAGE THE EICAS COMPUTER.
 (1)  
Do the procedure Removal/Installation of ESDS Metal Units (AMM 20-41-01/201).

 (2)  
Remove the EICAS computer (AMM 20-10-01/401).


 S 024-022
 TASK 31-41-02-404-029
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 仪表 CHAPTER 31 - INSTRUMENTS 2(77)