(b)
Make sure that these circuit breakers on the P11 panel are closed: 1) 11A10, AIR DATA CMPTR LEFT 2) 11E9, FMCS CMPTR LEFT 3) 11F5, RADIO ALTM LEFT
(c)
Open these circuit breakers on the P11 panel:
1) 11E30, FMCS CMPTR RIGHT
2) 11F26, RADIO ALTM RIGHT
ú
31-41-00
ALL ú ú 09 Page 515 ú Sep 28/00
A
757
MAINTENANCE MANUAL
3) 11F30, AIR DATA CMPTR RIGHT
(d) Set the COMPUTER switch on the DISPLAY select panel to the "L"
position.
(e) Push the CONF/MCDP switch on the EICAS MAINT panel.
(f) Make sure that the CONF/MCDP page shows on the bottom display.
(g) Make sure that the data that follows shows on the bottom
display:
1) EICAS: ON
2) ADC: ON or NCD or TEST or FAIL
3) RA: ON or NCD or TEST or FAIL
4) FMC: ON or NCD or TEST or FAIL
5) All other digital data sources: ON or NCD or TEST or FAIL
or OFF
(h) Set the COMPUTER switch to on the DISPLAY select panel to the
"R" position.
(i) Make sure that the data that follows shows on the bottom
display:
1) EICAS: ON
2) ADC: OFF
3) RA: OFF
4) FMC: OFF
5) All other digital data sources: ON or NCD or TEST or FAIL
or OFF
(j) Close the following P11 panel circuit breakers:
1) 11E30, FMCS CMPTR RIGHT
2) 11F26, RADIO ALTM RIGHT
3) 11F30, AIR DATA CMPTR RIGHT
(k) Open these circuit breakers on the P11 panel:
1) 11A10, AIR DATA CMPTR LEFT
2) 11E9, FMCS CMPTR LEFT
3) 11F5, RADIO ALTM LEFT
(l) Make sure that the data that follows shows on the bottom
display:
1) EICAS ON
2) ADC: ON or NCD or TEST
ú
31-41-00
ALL ú ú 10 Page 516 ú Sep 28/00
A
757 MAINTENANCE MANUAL
3) RA: ON or NCD or TEST
4) FMC: ON or NCD or TEST
(m)
Set the COMPUTER switch on the DISPLAY select panel to the "L" position.
(n)
Make sure that the data that follows shows on the bottom display: 1) EICAS: ON 2) ADC: OFF 3) RA: OFF 4) FMC: OFF
(o)
Close these circuit breakers on the P11 panel: 1) 11A10, AIR DATA CMPTR LEFT 2) 11E9, FMCS CMPTR LEFT 3) 11F5, RADIO ALTM LEFT
G. Put the Airplane Back to Its Usual Condition
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 仪表 CHAPTER 31 - INSTRUMENTS 2(69)
