(b)
Make sure the WARNING lights are not on.
ú
31-51-00
ALL ú ú 14 Page 535 ú Sep 28/00
A
757
MAINTENANCE MANUAL
(c)
Make sure the siren aural warning is not on.
(d)
Make sure the red EICAS message, STABILIZER, does not show on the top display.
S 865-630
(28) Slowly move the control wheel STAB TRIM controls forward until the takeoff configuration warnings come on.
(a)
Measure dimension B on the ballscrew actuator
(AMM 27-48-00/501).
(b)
Make sure that dimension B is 22.76 (+.30/-.20) inches.
S 865-631
(29) Use the control wheel STAB TRIM controls to move the stabilizer such that dimension B is between 15 and 21 inches.
(a) Make sure the takeoff configuration warnings are not on.
S 865-632
(30) Slowly move the control wheel STAB TRIM controls rearward until the takeoff configuration warnings come on.
(a)
Measure dimension B on the ballscrew actuator
(AMM 27-48-00/501).
(b)
Make sure that dimension B is 13.78 (+.20/-.30) inches.
S 865-136
(31) Use the control wheel STAB TRIM controls to move the stabilizer such that dimension B is between 15 and 21 inches.
(a) Make sure the takeoff configuration warnings are not on.
S 865-088
(32)
Release the CONFIG switch.
(33)
Set the parking brake to the ON position.
(34)
Put the FLAP lever in the UP position.
S 865-633
S 865-634
NOTE: Permit time for the flaps and slats to retract.
____
ú
31-51-00
ALL ú ú 12 Page 536 ú Jan 20/99
A
757 MAINTENANCE MANUAL
S 865-635
(35)
Remove hydraulic power (AMM 29-11-00/201).
S 865-636
(36)
Close these P11 panel circuit breakers:
(a)
11C6, FLT CONT ELEC 1L AC
(b)
11C7, FLT CONT ELEC 1L DC
(c)
11C8, FLT CONT ELEC 2L AC
(d)
11C9, FLT CONT ELEC 2L DC
(e)
11G11, AUTO SPEED BRAKE
(f)
11G17, FLT CONT ELEC 1R AC
(g)
11G18, FLT CONT ELEC 1R DC
(h)
11G27, FLT CONT ELEC 2R AC
(i)
11G28, FLT CONT ELEC 2R DC
(j)
11J33, WARN ELEX A
Q. Overspeed Warning Signals Test
S 865-533
(1)
Make sure that there is no pressure on the pilot-static system.
