(by) Remove the DO-NOT-CLOSE tags and close these circuit breakers on the overhead panel, P11: 1) 11D7, ENGINES STBY IGNITION LEFT 1 2) 11D8, ENGINES STBY IGNITION LEFT 2 3) 11D9, ENGINES STBY IGNITION RIGHT 1 4) 11D10, ENGINES STBY IGNITION RIGHT 2 5) 11K9, LEFT ENGINE OIL PRESS 6) 11K35, RIGHT ENGINE OIL PRESS 7) 11L1, LEFT ENGINE IGN 1 8) 11L28, RIGHT ENGINE IGN 1
S 715-042
(5) EICAS Maintenance Panel Test
(a)
Make sure that this circuit breaker on the P11 panel is closed:
(b)
Make sure that this circuit breaker on the P11 panel is closed: 1) 11S15, AIR/GND SYS 1
ú
31-41-00
ALL ú ú 13 Page 514 ú Sep 28/00
A
757
MAINTENANCE MANUAL
(c)
Push the ECS MSG switch on the EICAS MAINT panel.
(d)
Make sure that the ECS/MSG page shows on the bottom display.
(e)
Push the PERF APU switch on the EICAS MAINT panel.
(f)
Make sure that the PERF/APU page shows on the bottom display.
(g)
Push the AUTO-READ switch on the EICAS MAINT panel.
(h)
Make sure that AUTO EVENT shows on the bottom of the PERF/APU page.
(i)
Push the MAN-READ switch on the EICAS MAINT panel.
(j)
Make sure that MAN EVENT shows at the bottom of the PERF/APU page.
(k)
Push the ENG EXCD switch on the EICAS MAINT panel.
(l)
Make sure that the ENG/EXCD page shows on the bottom display.
(m)
Push the CONF/MCDP switch on the EICAS MAINT panel.
(n)
Make sure that the CONF/MCDP page shows on the bottom display.
(o)
Push the ELEC HYD switch on the EICAS MAINT panel.
(p)
Make sure that the ELEC/HYD page shows on the bottom display.
(q)
Push the REC switch on the EICAS MAINT panel.
(r)
Push the MAN-READ switch on the EICAS MAINT panel.
(s)
Make sure that the ELEC/HYD data still shows.
(t)
Push the ERASE switch on the EICAS MAINT panel and hold it for 1 second.
(u)
Make sure that no numerical data shows on the bottom display.
S 715-047
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 仪表 CHAPTER 31 - INSTRUMENTS 2(68)
