(10)
Set the speedbrake control to the UP position.
S 865-610
(11)
Close this P11 panel circuit breaker:
S 865-609
(a) 11J33, WARN ELEX A
S 865-611
(12) Hold the CONFIG switch on the TEST panel in the LDG position.
(a) Make sure the red CONFIG light comes on.
ú
31-51-00
ALL ú ú 14 Page 516 ú Sep 28/00
A
757
MAINTENANCE MANUAL
(b)
Make sure the WARNING lights come on.
(c)
Make sure the siren aural warning comes on.
(d)
Make sure the SPEEDBRAKE light comes on.
S 865-612
(13) Set the COMPUTER switch on the EICAS control panel to the L and then the R position.
(a)
Make sure the EICAS message, GEAR NOT DOWN, shows on the top display.
(b)
Make sure the EICAS message, SPEEDBRAKES EXT, shows on the top display.
S 865-613
(14)
Release the CONFIG switch.
S 865-614
(15)
Close this P11 panel circuit breaker:
(a) 11B18, WARN ELEX B
S 865-615
(16) Open this P11 panel circuit breaker:
(a) 11J33, WARN ELEX A
S 865-616
(17) Hold the CONFIG switch on the TEST panel in the LDG position.
(a)
Make sure the red CONFIG light comes on.
(b)
Make sure the WARNING lights come on.
(c)
Make sure the siren aural warning comes on.
(d)
Make sure the SPEEDBRAKE light comes on.
S 865-113
(18)
Set the COMPUTER switch on the EICAS control panel to the L and then the R position.
(a)
Make sure the EICAS message, GEAR NOT DOWN, shows on the top display.
(b)
Make sure the EICAS message, SPEEDBRAKES EXT, shows on the top display.
(19)
Release the CONFIG switch.
S 865-167
(20)
Close this P11 panel circuit breaker:
S 865-617
(a) 11J33, WARN ELEX A
ú
31-51-00
ALL ú ú 07 Page 517 ú Jan 20/99
A
757
MAINTENANCE MANUAL
S 865-168
WARNING:_______ KEEP PERSONS AND EQUIPMENT AWAY FROM ALL CONTROL SURFACES
WHEN POWER IS SUPPLIED. AILERONS, ELEVATORS, RUDDER, FLAPS,
SLATS, SPOILERS, AND STABILIZER ARE FULLY POWERED SURFACES.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 仪表 CHAPTER 31 - INSTRUMENTS 2(111)
