MILLENNIUM™ 88813 SERIES PASSENGER SEATS 旅客座椅(78)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

Replace any cushion covers and seat back covers that have been damaged or are dirty/stained. These can be repaired/cleaned as required. Refer to CLEANING (Page Block 4000). 
Replace hook-and-pile fasteners on seat covers as required. 
Replace all back and seat cushion assemblies (Refer to IPL Figure 1). 

Page 14009
B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
MILLENNIUM. 88813 SERIES

Table 14005 (Continued) Heavy Check Tasks
TASK  TIME REQUIRED 
3  Leg Assemblies (Refer to IPL Figures 17 and 18) 
Check/tighten all fasteners. Replace any defective bolts. 
Check leg assemblies for damage caused during removal/installation of seat in tracks in the aircraft. Replace any defective/damaged components. 
Check all track fitting studs and track fitting assemblies. Replace any defective/damaged components. 
Check spreader assemblies for cracks, corrosion, or other damage. Replace any damaged spreaders. 
Check to make sure that all hardware on SEB is correctly tightened. Check for dust or other blockage in ventilation areas. 
4  Center Console Assembly (Refer to IPL Figures 7 and 8) 
Check PC power harness. Check connectors and examine harness for signs of chafing or wear. Replace as necessary. 
Check sliding tray and cocktail table assemblies. Replace as necessary. 
Replace front shroud assembly and side shroud panels, unless they have already been replaced since previous heavy check. 
Replace all armcap assemblies, unless they have already been replaced since previous heavy check. 
Replace all heelcap assemblies, unless they have already been replaced since previous heavy check. 
5  Back Assemblies and Installation (Refer to IPL Figures 3 and 4) 
Check all bolts and nuts for damage. Replace any worn or damaged items. 
Check all hydrolok assemblies. Replace as necessary. 
Adjust seat backs to the dimensions shown in the DESCRIPTION AND OPERATION section. 
Adjust seat controls, as required, by adjusting the cable jam nuts. 
Ensure the literature pocket springs are secure and correctly fitted. Replace any defective literature pocket springs. 

Page 14010
B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
MILLENNIUM. 88813 SERIES

Table 14005 (Continued) Heavy Check Tasks
TASK  TIME REQUIRED 
6  Frame Assembly (Refer to IPL Figure 17) 
Check/tighten all loose bolts and nuts. Pay particular attention to the hydrolok and recline arm installation. Replace any worn or damaged items. 
Check the baggage bar for damage and replace as necessary. 
Check to make sure that baggage bar tube plugs are securely fitted. Replace as necessary. 
Check all seat diaphragms. Replace as necessary. 
Check all seat belt linkages for damage and for security of attachment. Replace any damaged/ defective items. 
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：MILLENNIUM™ 88813 SERIES PASSENGER SEATS 旅客座椅(78)