Page 10
B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
MILLENNIUM. 88813 SERIES
B. Standard Features
The Millennium. seats have the following standard features:
Machined aluminum primary structure
Fabric bottom diaphragm suspension system
Life vest pouch under seatpan
Quick release anti-rattle track fitting
Articulating bottom support
Side restraint baggage bar.
C. Endbay Assembly (With Foodtray)
The endbay assembly features leather covered self-skinned armcaps and injection moulded rubstrips. Open the armcap to access the foodtray assembly which includes a slide and swivel feature. The endbay assembly also features the recline control. The power outlet indicator light is located at the side of the aisle endbay assembly.
CAUTION: DO NOT PUT OBJECTS COLDER THAN 10 DEGREES CELSIUS (50 DEGREES FAHRENHEIT) OR HOTTER THAN 71 DEGREES CELSIUS (160 DEGREES FAHRENHEIT) ON THE FOODTRAY ASSEMBLY. THIS WILL HELP PREVENT DAMAGE TO THE FOODTRAY. TEMPERATURES COLDER THAN 10 DEGREES CELSIUS (50 DEGREES FAHRENHEIT) OR HOTTER THAN 71 DEGREES CELSIUS (160 DEGREES FAHRENHEIT) CAN CAUSE THE FOODTRAY TO WARP AND POSSIBLY COME APART.
D. Center Console Assembly
The center console assembly is the central divider in the double seats. It features an injection moulded cocktail table, swivelling injection moulded peanut trays and a leather self-skinned armcap. The PCUs and RJUs are side mounted on the center console. The power outlets are located at the front of the center console.
E. Back Assembly The back assembly features adjustable recline and a rear magazine pocket.
F. Headrest Assembly
The headrest assembly provides the passenger with increased comfort. The headrest is adjustable vertically to allow for variation in passenger height. Also the side supports (headrest ears) can be rotated to provide side support for the passenger’s head.
Page 11
B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
MILLENNIUM. 88813 SERIES
G. Seatpan Assembly
The seatpan assembly supports the passenger with a fabric-based bottom support. It also includes an articulating feature for increased comfort.
4. Seat Assembly Operation
A. Back Recline
To move any back assembly from the upright to the recline position, activate the recline control button and apply pressure against the backrest. When the control button is released the backrest is restrained from any further movement.
To return the backrest to an upright position, activate the recline control button, release pressure from the backrest and it will return automatically to the normal upright position.
The recline unit incorporates an override device which will allow the backrest to be moved from a recline position to any angle up to and including the normal upright position by the application of a nominal load at the backrest top.
B. Headrest Operation
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：MILLENNIUM™ 88813 SERIES PASSENGER SEATS 旅客座椅(7)
