Page 5001
B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
MILLENNIUM. 88813 SERIES
Table 5001 (Continued)
Detailed Inspection
DETAILED INSPECTION (ACCEPT/REJECT EACH ITEM LISTED)
Check foodtray assemblies:
Check that the foodtray latch properly secures the table.
Check that the foodtray deploys and stows properly.
Check the foodtray top shrouds for nicks, cracks, stains, or burrs. NOTE: Burrs, nicks, and scratches are defined as material raised above the normal surface which, if not removed, would prevent complete and proper mating of parts and sealing surfaces. Where nicks and scratches allow bare metal to show through a protective finish, note the defect and assign the part for repair. Dents or other damage must not impair finish or functional operation of any part.
Check foodtray surfaces for serviceable appearance.
Check seat belts and seat belt shackles for serviceability, proper installation, and tightness of attaching hardware.
Endbay/arm:
Check PCU for proper function and installation.
Check armrest tension and lockout.
Check recline buttons for proper function.
Check cable routings.
Check hardware and metal parts for proper direction, tightness, and sharp edges/burrs.
Check paint and finishes for chipping and worn spots. Note the condition of bonding on parts and assemblies.
Bottom diaphragm:
Check for proper installation.
Check for proper tension. The diaphragm should not have sags or appear loose.
Check for tears or other damage to the fabric.
Check for part identification.
Baggage bar:
Check baggage bar for serviceable appearance.
Ensure that baggage bar plugs are installed.
Check all baggage bar hardware for tightness, burrs, and sharp edges.
Inspect for chafing and splitting.
Wiring Harnesses, Cables and Electrical Components:
Inspect for chafing and splitting.
Check for loose connections.
Check for cleanliness (No dirt, dust or contamination).
Page 5002
B/E AEROSPACE
COMPONENT MAINTENANCE MANUAL
MILLENNIUM. 88813 SERIES
Table 5001 (Continued)
Detailed Inspection
DETAILED INSPECTION (ACCEPT/REJECT EACH ITEM LISTED)
SEB:
Check all SEB hardware and metal surfaces for sharp edges.
Check for proper cable routing.
Check the connectors for proper installation.
Dress covers:
Check dress covers for cleanliness and serviceability.
Check dress cover labels for number of cleanings. NOTE: Refer to CLEANING (Page Block 4000) for information on flammability retardancy as affected by dry cleaning.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：MILLENNIUM™ 88813 SERIES PASSENGER SEATS 旅客座椅(30)
