%
Doc # 6.02.01 Page 205
Rev. 4 09 Jan 2003
24-61-00
DA 40 Series
AMM
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
% B. Install an Instrument Panel Switch %
Detail Steps/Work Items Key Items/References
(1) Hold the spring clips on the switch compressed and put the switch in position in the instrument panel. From the front of the instrument panel. Make sure that the clips have expanded and that the switch is correctly located.
(2) Connect the electrical cables to the switch. Refer to Chapter 92 for the Wiring Diagrams.
(3) Install the instrument panel cover. Refer to Section 25-10.
(4) Connect the main battery. Refer to Section 24-34. Connect the positive cable first.
(5) Install the top engine cowling. Refer to Section 71-11.
(6) Do a functional test of the switch: S Set the ELECTRIC MASTER key switch to ON. S Set the switch that you have installed to ON. S Set the switch that you have installed to OFF. S Set the ELECTRIC MASTER key switch to OFF. The system must operate correctly. The system must switch off.
%
Page 206 Doc # 6.02.01 09 Jan 2003 Rev. 4
24-61-00
DA 40 Series
Electrical Power
AMM
% 6. Remove /Install the ENGINE Switch
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
% A. Remove the ENGINE Switch %
Detail Steps/Work Items Key Items/References
(1) Remove the top engine cowling. Refer to Section 71-11.
(2) Disconnect the battery: S Disconnect the negative cable from the battery. S Disconnect the positive cable from the battery. Refer to Section 24-34.
(3) Disconnect the ECU backup battery: S Disconnect the negative cable from the battery. S Disconnect the positive cable from the battery. Refer to Section 24-34.
(4) Remove the instrument panel cover. Refer to Section 25-10.
(5) Disconnect the alternator excitation battery: S Disconnect the negative cable from the battery. S Disconnect the positive cable from the battery. Refer to Section 24-33.
(6) Remove the nut and washers that attach the switch.
(7) Move the switch towards the firewall. To give access to the electrical cable connection on the switch.
(8) Disconnect the electrical cables from the ENGINE MASTER switch.
(9) Remove the switch from the instrument panel.
%
Doc # 6.02.01 Page 207
Rev. 4 09 Jan 2003
24-61-00
DA 40 Series
AMM
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
% B. Install the ENGINE MASTER Switch %
Detail Steps/Work Items Key Items/References 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:钻石40飞机维护手册 DA 40 SERIES AMM 2(74)