R 1EFF : 051-099, 1 34-36-00Page 504 1 1 Config-2 May 01/05 1 1 1CES 1R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 34-36-00-740-052
A. BITE Test of the MMR
NOTE : the MMR1 shows indications on the CAPT PFD.
____
The MMR2 shows indications on the F/O PFD.
This test is for the MMR1. For the MMR2 use the indications between the parentheses.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the MCDU: On the MCDU:
- push the line key adjacent to the MMR1 (MMR2) indication. - the MMR1 (MMR2) page comes into view.
- push the line key adjacent to the SYSTEM TEST indication. - the MMR1 (MMR2) TEST 1/3 page withinstructions comes into view.
- push the NEXT PAGE key. - the MMR1 (MMR2) TEST 2/3 page with instructions comes into view.
- push the NEXT PAGE key. - the MMR1 (MMR2) TEST 3/3 page with instructions comes into view.
- push the line key adjacent to the START TEST indication. - On the MCDU, the TEST IN PROGRESS 20Sindication comes into view.
- On the CAPT (F/O) PFD: the LOC and G/S scales go out of view, the LOC and G/S red warnings come into view for some seconds, the MASTER CAUT lights come on and the single chime sounds, the LOC and G/S scales come into view, the G/S index comes into view, moves up, moves down, then goes out of view, and simultaneously, the LOC index comes into view, moves to the
R 1EFF : 001-049, 101-149, 151-199, 201-299, 1 34-36-00Page 505 1301-399, 401-499, 1Config-2 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------left then to the right, then goes out of view, the MASTER CAUT lights go off and the single chime stops.
-
push the line key adjacent to - the TEST OK indication comes into the YES indication. view.
-
push the line key adjacent to - the TEST CLOSE-UP indication comes the RETURN indication. into view.
-
push the line key adjacent to - the test procedure stops.
the RETURN indication.
R **ON A/C ALL
5. Close-up
________
Subtask 34-36-00-860-057
A. Put the aircraft back to its initial configuration.
(1)
Do the ADIRS stop procedure (Ref. TASK 34-10-00-860-005).
(2)
On the RMP1 or on the RMP2, set the ON/OFF switch to OFF.
(3)
On the EFIS control panel of the FCU, release the ILS pushbutton switch.
(4)
Do the EIS stop procedure
(Ref. TASK 31-60-00-860-002).
(5)
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NAVIGATION 导航3(9)