R 1EFF : 151-199, 1 34-41-00Page 525 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL
5. Close-up
________ Subtask 34-41-00-860-054
A. Put the aircraft back to its initial configuration.
(1)
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
(2)
On the panels 301VU and 500VU, set the PFD and ND potentiometers to OFF.
(3)
Do the ADIRS stop procedure (Ref. TASK 34-10-00-860-005)
(4)
Make sure that the work area is clean and clear of tool(s) and other items.
(5)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002)
1EFF : ALL 1 34-41-00Page 526 1 1 May 01/05R 1 1 1CES 1
TASK 34-41-00-730-001
System Test of the Weather Radar
WARNING : MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE
_______ YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT.
WARNING : STOP THE FUEL TANKER 200 ft. (60 m) FROM THE AIRCRAFT NOSE WHILE THE
_______ WEATHER RADAR OPERATES. DO NOT OPERATE THE FUEL TANKER/PUMP UNIT UNTIL YOU STOP THE OPERATION OF THE WEATHER RADAR.
WARNING : MAKE SURE THAT:
_______ -ALL PERSONS ARE MORE THAN 5 METERS (16.4FT) FROM THE ANTENNA. -NO PERSON IS IN THE AREA MADE BY AN ARC OF 135. ON EACH SIDE OF THE AIRCRAFT CENTERLINE. -THERE IS A MINIMUM SAFETY DISTANCE OF 5 METERS (16.4FT) BETWEEN THE AIRCRAFT AND ANY OBSTACLE IN THE AREA MADE BY AN ARC OF 90. ON EACH SIDE OF THE AIRCRAFT CENTERLINE.
1. Reason for the Job
__________________
-
antenna stabilization test by the ADIRU 3
-
antenna control test
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
No specific access platform 3.5 m (11 ft. 6 in.)
1EFF : ALL 1 34-41-00Page 527 1 1 May 01/05R 1 1 1CES 1
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-010 Procedure to Get Access to the SYSTEM REPORT/TEST NAV
Page
31-60-00-860-001 EIS Start Procedure
53-15-11-010-001 Opening of the Radome 110AL
53-15-11-410-001 Closing of the Radome 110AL
3. Job Set-up
__________
Subtask 34-41-00-865-053
A. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
-------------------------------------------------------------------------------
121VU COM NAV/RADAR/1 5SQ1 K13
R **ON A/C 051-099,
R 121VU COM NAV/RADAR/2 5SQ2 K14
R **ON A/C ALL
Subtask 34-41-00-010-050
B. Get Access
WARNING : MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER
_______
RADAR ARE OPENED, SAFETIED AND TAGGED.
(1)
In the cockpit, put a warning notice on the center pedestal to tell persons not to operate the weather radar.
(2)
Put the access platform in position in zone 110 below the radome.
R 1EFF : ALL 1 34-41-00Page 528 1 1 May 01/05 1 1 1CES 1
(3) Open the radome 110AL (Ref. TASK 53-15-11-010-001). NOTE : Two persons are necessary to open the radome.
____
(4) Make sure that the retaining arms of the radome lock correctly. **ON A/C 001-049, 101-105, 151-199,
Subtask 34-41-00-860-050-C
C. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(2)
Do the EIS start procedure (EFIS only) (Ref. TASK 31-60-00-860-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NAVIGATION 导航3(60)