• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 00:16来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者


 BITE Test of the Weather Radar
 WARNING : MAKE SURE THAT:
_______ -ALL PERSONS ARE MORE THAN 5 METERS (16.4FT) FROM THE ANTENNA. -NO PERSON IS IN THE AREA MADE BY AN ARC OF 135. ON EACH SIDE OF THE AIRCRAFT CENTERLINE. -THERE IS A MINIMUM SAFETY DISTANCE OF 5 METERS (16.4FT) BETWEEN THE AIRCRAFT AND ANY OBSTACLE IN THE AREA MADE BY AN ARC OF 90. ON EACH SIDE OF THE AIRCRAFT CENTERLINE.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 31-32-00-860-010 Procedure to Get Access to the SYSTEM REPORT/TEST NAV
 Page
 31-60-00-860-001 EIS Start Procedure
 34-10-00-860-002 ADIRS Start Procedure
 34-10-00-860-005 ADIRS Stop Procedure

 **ON A/C 001-049, 101-105, 151-199,
 34-41-00-991-001 Fig. 501
R **ON A/C 051-099, 106-149, 201-299, 301-399, 401-499,
 34-41-00-991-001-A Fig. 501A
 1EFF : ALL 1 34-41-00Page 508 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL


 3. Job Set-up
__________
 **ON A/C 001-049, 101-105,

 Subtask 34-41-00-860-053
 A. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 (2)
 Do the EIS start procedure (Ref. TASK 31-60-00-860-001).

 (3)
 Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002)

 (4)
 On the center pedestal, on the radar control unit, set :

 -
the ON/OFF switch to OFF

 -
the GAIN potentiometer to AUTO

 -
the TILT selector switch to 0.

 -
the mode selector switch to WX

 -
the WINDSHEAR AUTO/OFF switch to OFF.

 

 (5)
 On the FCU, on the CAPT and F/O EFIS control sections :

 -set the mode selector switches to ARC
 -select the scale selector switch to 10 position.

 (6)
 On one MCDU :


 -get the SYSTEM REPORT/TEST NAV menu page (Ref. TASK 31-32-00-860-010)
 -push the next page function key. R **ON A/C 051-099, 106-149, 201-299, 301-399, 401-499,
 Subtask 34-41-00-860-053-B
 A. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).

 (2)
 Do the EIS start procedure (Ref. TASK 31-60-00-860-001).


 1EFF : ALL 1 34-41-00Page 509 1 1 Aug 01/05 1 1 1CES 1


 (3)
 Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).

 (4)
 On the center pedestal, on the radar control unit, set :

 -
the SYS 1/OFF/2 selector switch to OFF

 -
the GAIN potentiometer to CAL

 -
the TILT selector switch to 0 deg.

 -
the mode selector switch to WX

 -
the GND CLTR SPRS switch to OFF

 -
the PWS/OFF/AUTO switch to OFF.

 

 (5)
 On the FCU, on the CAPT and F/O EFIS control sections :

 -set the mode selector switches to ARC.

 (6)
 On one MCDU :


 -get the SYSTEM REPORT/TEST NAV menu page (Ref. TASK 31-32-00-860-010)
 -push the next page function key.
 **ON A/C 151-199,
 Subtask 34-41-00-860-053-D
 A. Aircraft Maintenance Configuration
 (1)
 Energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-861-002).


 (2)
 Do the EIS start procedure (Ref. TASK 31-60-00-860-001).

 (3)
 Do the ADIRS start procedure (Ref. TASK 34-10-00-860-002).

 (4)
 On the center pedestal, on the radar control unit, set:

 -
the 1/OFF/2 switch to OFF

 -
the GAIN potentiometer to AUTO

 -
the TILT selector switch to 0 deg.

 -
the mode selector switch to WX

 -
the WINDSHEAR AUTO/OFF switch to OFF.

 

 (5)
 On the FCU, on the CAPT and F/O EFIS control sections:

 -set the mode selector switches to ARC
 -select the scale selector switch to 10 position.

 (6)
 On one MCDU:


 -get the SYSTEM REPORT/TEST NAV menu page (Ref. TASK 31-32-00-860-010)
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NAVIGATION 导航3(54)