(6)
TROUBLE SHOOTING DATA This function allows to analyze the snapshot of the recorded fault to detect any software bug. Two types of data are displayed:
-
some correlation parameters which are the date and the UTC hour displayed in clear english,
-
some snapshot data delivered in hexadecimal code or in clear
message.
(Ref. Fig. 040A)
(7)
GROUND REPORT This function is used to present class 1, 2 or 3 internal faults when they are detected on ground. These faults differ from those displayed on the LAST LEG REPORT page. The following figure shows examples of internal faults recorded on ground by the TCAS system. The relevant trouble shooting data are displayed by pressing the line key adjacent to the fault indication. (Ref. Fig. 039B)
(8)
DISCRETE CONFIGURATION This function is used to present the value or the status of several discretes. A report screen for each data shows the status of the discrete at the time this menu is selected. (Ref. Fig. 041)
R 1EFF : 051-099, 106-149, 201-299, 301-399, 1 34-43-00Page A57 1401-499, 1Aug 01/05 1 1 1CES 1
TCAS - TROUBLE SHOOTING DATA
Figure 040A
1EFF : 201-207, 210-210, 1 34-43-00Page A58 1 1 May 01/05 1 1 1CES 1
TCAS - DISCRETE CONFIGURATION
Figure 041
1EFF : 201-207, 210-210, 1 34-43-00Page A59 1 1 May 01/05 1 1 1CES 1 1EFF : 001-049, 051-099, 101-105, 1 34-43-00Page A60 1 1 May 01/05 1 1 1CES 1
R **ON A/C 001-049, 101-105,
(9) TCAS functional test A TCAS built-in functional test can be initiated by pressing the line key adjacent to the TEST indication on the TCAS maintenance sub-menu. The following sequence is then generated. (Ref. Fig. 042, 043) - the test ends with the display of the following message on the MCDU: TEST OK or TEST FAIL When all the tests are completed and no fault has been detected, the synthesized voice message TCAS SYSTEM TEST OK is announced. If one of the test criteria has not been met, the synthesized voice message TCAS SYSTEM TEST FAIL is announced. Remarks: - this short test permits to check rapidly, on ground, the functionality of the TCAS and particularly that of the PFD/NDs via the DMC. In addition it enables to check correct operation of the synthesized voice message system.
NOTE : To date, the DMCs cannot present four intruders as specified____ on the instruction page. Only three intruders (RA, TA, PROXIMATE) are shown on the test display. The future Full Time Display will call for their presentation.
(10) Software configuration follow-up The TCAS has the DATA BASE loading capacity from a portable data loader or an airborne data loader (MDDU) in compliance with ARINC 615 characteristics. Consequently it must be possible to check correct downloading by using the CFDS/MCDU interface. The LRU IDENTIFICATION item displays the downloaded software version reference.
NOTE : The TCAS is not data loadable.____
R **ON A/C 051-099,
R R R R R (9) TCAS functional test A TCAS built-in functional test can be initiated by pressing the line key adjacent to the TEST indication on the TCAS maintenance sub-menu. The following sequence is then generated. (Ref. Fig. 042A, 043A)
TCAS - Functional Test (Sheet 1/2)
Figure 042
1EFF : 001-049, 101-105, 151-199, 1 34-43-00Page A61 1 1 May 01/05 1 1 1CES 1
R TCAS - Functional Test (Sheet 1/2)
R Figure 042A
1EFF : 051-099, 1 34-43-00 Page A62
1 1 May 01/05
1 1
1CES 1
TCAS - Functional Test (Sheet 1/2)
Figure 042B
R 1EFF : 106-149, 201-209, 211-299, 301-399, 1 34-43-00Page A63 1401-499, 1Aug 01/05 1 1 1CES 1
TCAS - Functional Test (Sheet 1/2) R Figure 042C
1EFF : 201-207, 210-210, 1 34-43-00Page A64 1 1 May 01/05 1 1 1CES 1
TCAS - Functional Test (Sheet 2/2)
Figure 043
1EFF : 001-049, 101-105, 151-199, 1 34-43-00Page A65 1 1 May 01/05 1 1 1CES 1
R TCAS - Functional Test (Sheet 2/2)
R Figure 043A
1EFF : 051-099, 1 34-43-00 Page A66
1 1 May 01/05
1 1
1CES 1
-the test ends with the display of the following message on the
MCDU: TEST PASSED or TEST FAIL
-at the end of the functional test the TCAS computer generates a complete sequence of synthesized voice messages. When all the tests are completed and no fault has been detected the computer reports TCAS TEST PASS. If one of the test criteria has not been met, the synthesized voice message TCAS SYSTEM TEST FAIL is announced. Remarks:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM NAVIGATION 导航3(133)
