R 1EFF : 051-099, 1 34-41-00Page 517 1 1 May 01/05 1 1 1CES 1
Weather Radar Test
Figure 501A/TASK 34-41-00-991-001-A
R 1EFF : 051-099, 106-149, 201-299, 301-399, 1 34-41-00Page 518 1401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
the YES indication.
8. On the MCDU:
-push the line key adjacent to the YES indication.
9. On the MCDU:
-push the line key adjacent to the RETURN indication.
10. On the MCDU:
-push the line key adjacent to the RETURN indication.
11. On the center pedestal, on the radar control unit:
-
set the PWS AUTO/OFF switch to OFF.
-
set the SYS 1/OFF/2 selector switch to OFF.
MAKE SURE RADAR TEST PATTERN IS
DISPLAYED
On the MCDU:
-
the TEST OK indication is shown.
On the MCDU:
-
the TEST CLOSE-UP page is shown:SET ADIRU 1+2+3 TO OFF
-SET SYSTEM OFF AND SET PWS TO OFF ON RADAR CONTROL PANEL
On the MCDU:
-
the RADAR 1 (RADAR 2) page comes intoview.
On the CAPT and F/O NDs:
-
the WR TEST and the tilt indicationsgo out of view after some seconds.
R **ON A/C 106-149, 201-299, 301-399, 401-499,
Subtask 34-41-00-740-050-A
A. BITE Test of the Weather Radar
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On one MCDU, on the NAV menu On the MCDU: page: - the RADAR 1 page comes into view.
-push the line key adjacent to
the RADAR 1 indication
2. On the MCDU:
R 1EFF : 051-099, 106-149, 201-299, 301-399, 1 34-41-00Page 519 1401-499, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- push the line key adjacent to the TEST indication. On the MCDU:- these instructions come into view:
SYSTEM OFF
CHANGE CONTROL PANEL SYSTEM SWITCH TO
ON
AFTER TEST
SWITCH SYSTEM TO OFF
3. On the center pedestal, on the radar control unit: On the MCDU:- the PLEASE WAIT indication comes into
- set the ON/OFF selector switch to ON. - set the PWS AUTO/OFF switch to AUTO. view for some seconds- then, the TEST page 1/2 comes intoview with these initial conditions:INITIAL CONDITIONS:
- SET ADIRU 1+2+3 to NAV
- SELECT RELEVANT SYSTEM AND SET PWS
TO AUTO ON RADAR CONTROL PANEL
MAKE SURE SEQUENCE OCCURS AFTER PUSHING START TEST LINE KEY:
- ON PFD'S:"W/S AHEAD" AMBER
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NAVIGATION 导航3(57)