(2)
Put the rudder pedals in the neutral position.
(3)
On the center pedestal, on the panel 110VU, make sure that the RUD TRIM indicator shows zero.
(4)
On the overhead panel 23VU, release the FLT CTL/FAC 1 pushbutton switch and the OFF legend comes on.
(5)
On the overhead panel 24VU, release the FLT CTL/FAC 2 pushbutton switch and the OFF legend comes on.
(6)
Put the warning notices in the flight compartment to tell persons not
Panel and Rigging Pin Locations Figure 401/TASK 27-21-41-991-001
1EFF : 1 1R 1CES ALL 1 11 1 27-21-41 Page 404 Aug 01/01
Sling Attachment Figure 402/TASK 27-21-41-991-002
1EFF : 1 1R 1CES ALL 1 11 1 27-21-41 Page 405 Aug 01/01
to operate the flight controls.
(7) Depressurize the Blue hydraulic system (Ref. TASK 29-10-00-864-003). Subtask 27-21-41-865-050
D. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18
Subtask 27-21-41-860-051
E. Aircraft Maintenance Configuration
(1)
Make sure that the hydraulic systems are depressurized and put them in the maintenance configuration. (Ref. TASK 29-00-00-864-001)
(2)
Put warning notices in position to tell persons not to pressurize the hydraulic systems.
(3)
De-energize the aircraft electrical circuits. (Ref. TASK 24-41-00-862-002)
R **ON A/C 001-049, 051-099, 101-105, 151-158, 201-210,
Subtask 27-21-41-010-050-A
F. Get Access
(1)
Put the access platform in position.
(2)
Open the access panels 325BL, 325BR, 325CL, 325CR, 325DL and remove the access panels 325EL, 325ER, 325DR at the trailing edge of the vertical stabilizer (1) (Ref. TASK 55-33-13-010-002).
(3)
Open the access door 312AR.
