-
the rod (2) which connects the centering spring rod (1) to the travel limitation unit (5),
-
the rod (4) which connects the upper bellcrank (3) to the travel limitation unit (5),
-
the centering spring rod (1).
(2)
Make sure that their attachment bolts have locknuts and that the safety pins are correctly installed.
(3)
Make sure that there is no corrosion on the control linkage components.
5. Close-up
________ Subtask 27-21-00-410-058
A. Close Access
(1) Close the access doors 325BL, 325CL, 325DL, 325EL.
(2) Remove the access platform(s). Subtask 27-21-00-942-066
B. Remove the warning notice(s).
1EFF : ALL 1 27-21-00Page 635 1 1 May 01/05R 1 1 1CES 1
Component Location
Figure 606/TASK 27-21-00-991-013
1EFF : ALL 1 27-21-00 Page 636
1 1 May 01/05
1 1
1CES 1
RUDDER - REMOVAL/INSTALLATION
_____________________________
TASK 27-21-41-000-001
Removal of the Rudder
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific crane
No specific rubber mat
No specific rudder support
R No specific tie wraps No specific warning notices No specific access platform 11.0 m (36 ft. 1 in.) SL90-314-3750 1 TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 SL90-314-5625 1 TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 SL90-314-7500 1 TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA5454 SL90-315-3750 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-315-7500 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-322-5625 1 WRENCHES - NOTCHED, TIGHTENING OF NUTS NSA5454 SL90-350-7500 1 TOOL - EXTRACTION, TAB WASHERS STA-LOK NSA 5454 98D27207545000 1 PIN - RIGGING 98D27207547000 1 PIN - RIGGING 98D27207548000 1 PIN - RIGGING 98D55307518000 1 SLING - R/I VERTICAL STABILIZER AND RUDDER B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power
24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power
29-00-00-864-001 29-10-00-863-003 29-10-00-864-003 53-55-12-000-001 55-33-13-010-002 Put the Related Hydraulic System in the Depressurized Configuration before Maintenance ActionPressurize the Blue Hydraulic System with a Ground Power SupplyDepressurize the Blue Hydraulic SystemRemoval of the Rudder Fairings 325AL and 325AROpening/Removal of the Trailing Edge Access-Panels 325EL, 325ER, 325DL, 325DR, 325CL, 325CR, 325BL and
325BR
55-42-13-000-001 Removal of the Access Panel 326CT at the Rudder
27-21-41-991-001 27-21-41-991-002 27-21-41-991-003 Attach Fitting No. 7Fig. 401Fig. 402Fig. 403
**ON A/C 001-003, 051-054,
27-21-41-991-004-B Fig. 404 R **ON A/C 004-049, 055-099, 101-149, 151-199, 201-299, 301-399, 401-499, 3. Job Set-up
27-21-41-991-004-A Fig. 404A
**ON A/C ALL
27-21-41-991-005 Fig. 405
27-21-41-991-006 Fig. 406
__________
(Ref. Fig. 401/TASK 27-21-41-991-001, 402/TASK 27-21-41-991-002)
Subtask 27-21-41-860-050
A. Aircraft Maintenance Configuration R (1) Energize the aircraft electrical circuits. (Ref. TASK 24-41-00-861-
002)
Subtask 27-21-41-865-053
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 49VU AUTO FLT/FAC1/26VAC 14CC1 B03 121VU AUTO FLT/RUDDER/TRIM/IND 15CC M20 121VU AUTO FLT/FAC2/28VDC 5CC2 M19 121VU AUTO FLT/FAC2/26VAC 14CC2 M18
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵1(164)
