5.
On the center pedestal, on the MCDU:
-Get the SYSTEM REPORT/TEST page (Ref. TASK 31-32-00-860-001).
-
Push the line key adjacent to the NAV indication.
-
Push the line key adjacent to the ADR3 indication.
-
Push the line key adjacent to the OUTPUT TEST indication.
-
Push the line key adjacent to the INTERFACE TEST indication.
-Follow the initial condition (set AIR DATA selector switch to CAPT 3).
the travel of the rudder for a right turn and a left turn.
The rudder moves smoothly to the left.On the lower ECAM display unit, on the F/CTL page:
-
the RUD/G, B, Y symbols are green,
-
the pointer of the RUD indicator moves smoothly to the left mark.
-
the protractor that measures the rudder travel shows 25. plus or minus 1..
The rudder moves to the neutral
position.
On the lower ECAM display unit, on the
F/CTL page:
-
the RUD/G, B, Y symbols are green,
-
the pointer of the RUD indicator moves to the neutral position,
-
the protractor that measures the rudder travel shows 0.. The maximum no-return value is 15'max.
On the MCDU:
-
The SYSTEM REPORT/TEST page comesinto view.
-
The SYSTEM REPORT/TEST NAV page comesinto view.
-
The ADR3 page comes into view.
-
The ADR3 OUTPUT TEST page comes intoview.
-
The ADR3 INTERFACE TEST 1/2 pagecomes into view.
R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 27-21-00Page 534 1301-399, 1May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- Push the NEXT PAGE KEY. - The ADR3 INTERFACE TEST 2/2 page
comes into view.
- Push the line key adjacent to - On the Captain's PFD, the speed scale
the START TEST indication. moves up and stops at 367.7 KTS.
NOTE : Ignore the RETARD warning.____
To stop it, push the FADEC
pushbutton switch on the
MAINTENANCE panel 50VU.
- Wait 25 sec. approximately
before you move the pedals.
6. In the CAPT or F/O seat:
- push the right pedal until it The rudder moves smoothly to the right.
touches the mechanical stop The protractor that measures the rudder
(adjustable stop). travel shows 3.5. plus or minus 0.3..
7. Slowly release the right pedal. The rudder moves to the neutral
position.
The protractor that measures the rudder
travel shows 0..
The maximum no-return value is 15'.
8. Push the left pedal until it The rudder moves smoothly to the left.
touches the mechanical stop. The protractor that measures the rudder
travel shows 3.5. plus or minus 0.3..
9. Slowly release the left pedal. The rudder moves to the neutral
position.
The protractor that measures the rudder
travel shows 0..
The maximum no-return value is 15'.
10. On the center pedestal, on the
MCDU:
- Push the line key adjacent to
the RETURN indication.
- Push the MCDU MENU mode key. On the MCDU:
R 1EFF : 001-049, 051-099, 101-149, 201-299, 1 27-21-00Page 535 1301-399, 1May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-The MCDU MENU page comes into view.
R **ON A/C 151-199, 401-499,
Subtask 27-21-00-720-050-A
A. Do this test :
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. In the CAPT or F/O seat: The rudder moves smoothly to the right.
-push the right pedal until it On the lower ECAM display unit, on the touches the mechanical stop F/CTL page: (the adjustable stop). - the RUD/G, B, Y symbols are green,
-
the pointer of the RUD indicator moves smoothly to the right mark,
-
the protractor that measures the rudder travel shows 30. plus or minus 1..
2. Slowly release the right pedal. The rudder moves to the neutral position. On the lower ECAM display unit, on the F/CTL page:
-
the RUD/G, B, Y symbols are green,
-
the pointer of the RUD indicator moves to the neutral position,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵1(146)
