2.
Aircraft designation, including type and series, manufacturer’s name, aircraft serial number and year of manufacture.
3.
Current airframe hours and cycles.
4.
Engine and propeller type and serial numbers.
5.
Aircraft certified maximum take off mass.
6.
Current location of the aircraft and details of the individual or organization acting on behalf of the registered owner who will be responsible for presenting the aircraft for inspection.
III. Other detailed information required with the application, such as:
1.
Flight Manual, or equivalent, reference.
2.
Details of the current Certificate of Airworthiness and/or Export Certificate of Airworthiness. (It is probably sufficient to require only copies of these documents at this stage, the originals can be viewed at a later stage in the issue process)
3.
Basic details of any major modifications or major changes incorporated since initial certification.
4.
Details of equipment installations intended for particular operational roles, e.g. towing, agricultural spraying and provision for the carriage of any external loads.
Note 1.— The application form may typically contain a section requiring the certification and signature of the applicant. Some States also use a separate section on the form to enable the CAA or delegated representative to certify that the information provided is complete, and that the product is airworthy and conforms to the pertinent requirements, except as noted in the additional remarks section. It should be noted that such a “CAA only” section on the form may be useful but is not considered obligatory.
Note 2.— Because of radio licensing requirements some States will require details to be provided of equipment capable of transmitting and receiving radio signals. The application form can also request such information if required.
— — — — — — — —
APPENDIX B.— APPLICATION FOR THE RENEWAL OF A
CERTIFICATE OF AIRWORTHINESS
The extent of information required to be provided by an applicant for the renewal of a Certificate of Airworthiness (see paragraph 3.2.4 of Part III) will depend on whether the State has a direct “hands-on” requirement for involvement in the renewal process or relies on certified statements of compliance provided by an organization or individual approved by the CAA.
Where there is extensive involvement by the CAA in the renewal process the application may consist only of a simple statement of, for example, the applicant’s name and address, the aircraft type and registration, the date of expiry of the current Certificate of Airworthiness, and where the aircraft and supporting documentation will be made available for inspection by the CAA’s airworthiness inspection division (AID): in effect a simple administrative application intended to set in motion a formal inspection by the AID.
In the case of a Certificate of Airworthiness renewal recommendation from an authorized organization or individual, the application may take the form of a certified statement of the aircraft’s current compliance with a number of CAA requirements. An application of this type may therefore typically require the following information.
I. Contact information for the applicant
II. Basic information regarding the aircraft, such as:
1.
Aircraft designation including type and series, manufacturer’s name, aircraft serial number and year of manufacture.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：适航手册 AIRWORTHINESS MANUAL(63)
