曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
( ) Scheduling information for ( ) aircraft instruments, including recommended periods for ( ) cleaning, ( ) inspecting, ( ) adjusting, ( ) testing, and ( ) lubricating; and ( ) the work recommended at these periods. G23.3(b)(1)
( ) Scheduling information for ( ) aircraft equipment, including recommended periods for ( ) cleaning, ( ) inspecting, ( ) adjusting, ( ) testing, and ( ) lubricating; and ( ) the work recommended at these periods. G23.3(b)(1)
( ) Degree of inspection for each part of the ( ) aircraft and its ( ) engines, ( ) the auxiliary power unit, ( ) propellers, ( ) accessories, ( ) instruments, and ( ) equipment. G23.3(b)(1)
( ) Applicable wear tolerances. G23.3(b)(1)
Applicant may refer to an ( ) accessory, ( ) instrument, or ( ) equipment manufacturer as the source of this information if applicant shows ( ) that the item is exceptionally complex and requires specialized maintenance techniques, test equipment, or expertise. G23.3(b)(1)
( ) Recommended overhaul periods and necessary cross-references to the ALS. G23.3(b)(1)
( ) An inspection programme that includes ( ) the frequency and ( ) extent of the inspection necessary to provide for continued airworthiness . G23.3(b)(1)
( ) Troubleshooting information describing ( ) probable malfunctions, ( ) how to recognize those malfunctions, and ( ) remedies for them. G23.3(b)(2)
( ) Description of the order and method of ( ) removing and ( ) replacing products (engines and propellers) with any precautions. G23.3(b)(3)
( ) Description of the order and method of ( ) removing and ( ) replacing parts, with any precautions. G23.3(b)(3)
( ) Other instructions, including ( ) storage limitations and procedures for ( ) testing system during ground running, ( ) making symmetry checks, ( ) weighing and determining the center of gravity, ( ) lifting, and ( ) shoring. G23.3(b)(4)
INSTRUCTIONS FOR CONTINUED AIRWORTHINESS (ICA) REQUIREMENTS Regulation Appendix (sample reference) Location In ICA
( ) Diagrams of structural access plates and information needed to gain access for inspections when access plates are not provided. G23.3(c)
( ) Details for applying special inspection techniques, including radiographic and ultrasonic testing, where such processes are specified. G23.3(d)
( ) Information needed to apply protective treatment to structure after inspection. G23.3(e)
( ) All data on structural fasteners, such as ( ) identification, ( ) discard recommendations, and ( ) torque values. G23.3(f)
( ) List of special tools needed. G23.3(g)
( ) For Commuter Category aircraft: electrical loads applicable to the various systems. G23.3(h)(1)
( ) For Commuter Category aircraft: methods of balancing control surfaces. G23.3(h)(2)
( ) For Commuter Category aircraft: identification of primary and secondary structures. G23.3(h)(3)
( ) For Commuter Category aircraft: any special repair methods applicable. G23.3(h)(4)
( ) ICA must contain a section, titled Airworthiness Limitations, that is ( ) segregated and ( ) clearly distinguishable from the rest of the document. NOTE: The appropriate CAA office will evaluate and approve the Airworthiness Limitations Section (ALS) in the applicant’s ICA. G23.4
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:适航手册 AIRWORTHINESS MANUAL(47)