1) If the VOR flag does not show on the left side of the RMI, then you corrected the fault.
(c)
If there is no fault that relates to the VOR receiver 1, then continue.
(d)
Do this check of the wiring between the VOR receiver 1 and the RMI:
1) Remove the VOR receiver 1. To remove it, do this task: VOR/MKR Receiver Removal, AMM TASK 34-51-01-000-801.
2) Remove the RMI. To remove it, do this task: Radio Magnetic Indicator (RMI) Removal, AMM TASK 34-22-01-000-801.
EFFECTIVITY
34-22 TASKS 801-802
SIL ALL
Page 203 D633A103-SIL Jun 10/2006
3) Do a wiring check between these pins of connectors D3679 and D3623B:
D3679 D3623B
pin38 ------------------pinB13 pin39 ------------------pinC13
4) If you find a problem with the wiring, then do these steps: a) Repair the wiring. b) Re-install the VOR receiver 1. To install it, do this task: VOR/MKR Receiver
Installation, AMM TASK 34-51-01-400-801. c) Re-install the RMI. To install it, do this task: Radio Magnetic Indicator (RMI) Installation, AMM TASK 34-22-01-400-801. d) If the VOR flag does not show on the left side of the RMI, then you corrected the fault. 5) If you do not find a problem with wiring, then do these steps: a) Re-install the VOR receiver 1. To install it, do this task: VOR/MKR Receiver Installation, AMM TASK 34-51-01-400-801. b) Install a new RMI. To install it, do this task: Radio Magnetic Indicator (RMI) Installation, AMM TASK 34-22-01-400-801. c) If the test in the installation task for the RMI is satisfactory, then you corrected the fault.
(2) If the VOR flag shows on the right side of the RMI, then do these steps:
(a)
Do
the
VOR
receiver
2
BITE
procedure
(34-51
TASK
801).
(b)
If there is a fault that relates to the VOR receiver 2, then do the FIM task to clear that message.
1) If the VOR flag does not show on the RMI, then you corrected the fault.
(c)
If there is no fault that relates to the VOR receiver 2, then continue.
(d)
Do this check of the wiring between the VOR receiver 2 and the RMI: 1) Remove the VOR receiver 2. To remove it, do this task: VOR/MKR Receiver Removal, AMM TASK 34-51-01-000-801. 2) Remove the RMI. To remove it, do this task: Radio Magnetic Indicator (RMI) Removal,
AMM TASK 34-22-01-000-801. 3) Do a wiring check between these pins of connectors D3679 and D3625B:
D3679 D3625B
pin48 ------------------pinB13 pin49 ------------------pinC13
4) If you find a problem with the wiring, then do these steps: a) Repair the wiring. b) Re-install the VOR receiver 2. To install it, do this task: VOR/MKR Receiver
Installation, AMM TASK 34-51-01-400-801. c) Re-install the RMI. To install it, do this task: Radio Magnetic Indicator (RMI) Installation, AMM TASK 34-22-01-400-801. d) If the VOR flag does not show on the right side of the RMI, then you corrected the fault. 5) If you do not find a problem with wiring, then do these steps:
EFFECTIVITY SIL ALL 34-22 TASK 802
D633A103-SIL BOEING PROPRIETARY -Copyright # Unpublished Work -See title page for details Page 204 Jun 10/2006
a) Re-install the VOR receiver 2. To install it, do this task: VOR/MKR Receiver Installation, AMM TASK 34-51-01-400-801.
b) Install a new RMI. To install it, do this task: Radio Magnetic Indicator (RMI) Installation, AMM TASK 34-22-01-400-801.
c) If the test in the installation task for the RMI is satisfactory, then you corrected the fault.
-------------------------END OF TASK ---------------------------
803. ADF Flag Shows on RMI -Fault Isolation
A. Description
(1)
This task is for this observed fault:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-600/700/800/900 FAULT ISOLATION MANUAL 故障隔离手册 导航(78)
