• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-20 07:59来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 


 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 13 Page 27 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

EPR OR THR AS INSTALLED


MODE CONTROL PANEL . A/T ARM ON . EPR SELECTED ATTITUDE DIRECTOR INDICATION . EPR MODE DISPLAYED . SPEED ERROR DISPLAYED

 

 

UPPER EICAS DISPLAY . CLB MODE SELECTED . REF EPR DISPLAYED . MAX EPR DISPLAYED . REF BUG DRIVEN BY TMC


AIRPLANES WITH STANDARD FORMAT FAST/SLOW DISPLAY AIRPLANES WITH SPEED TAPE DISPLAY AIRPLANES WITH EURO FORMAT FAST/SLOW DISPLAY
Autothrottle - EPR Mode
Figure 13

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 08 Page 28 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
M21281
A

757
MAINTENANCE MANUAL

 


3

AIRPLANES WITH STANDARD FORMAT FAST/SLOW DISPLAY AIRPLANES WITH SPEED TAPE DISPLAY AIRPLANES WITH EURO FORMATS FAST/SLOW DISPLAY
M21347
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 09 Page 29 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 (14)
 Autothrottle - Flight Level Change Mode (Fig. 15)

 (a)  
The Flight Level Change (FLCH) mode is engaged when the A/T switch is in the ARM position and the MCP accepts the FLCH mode request (in air only).

 (b)  
For a climb transition, throttle command to achieve the EPR REF is given to the A/T servomotor generator. For a descent transition, the aft PLA or MIN EPR, based on fuel flow or anti-ice requirements, controls the minimum throttle position. During descent in icing conditions, the approach idle power setting is used as minimum thrust setting.

 (c)  
When the FLCH mode is engaged, annunciation of FLCH appears on the EADI. The reference bug on the EICAS EPR indicator is driven by the TMC to the EPR REF value. The fast/slow display on the EADI provides speed performance information as related to the MCP selected speed.

 (d)  
If the selected altitude on the MCP is changed 500 feet or more, a new transition is commanded. Manual thrust lever movement by the pilot places the autothrottle servo in a hold state until a new mode is selected or the selected altitude is reached.

 

 (15)
 Autothrottle - Go-Around Mode (Fig. 16)

 (a)  
The Go-Around (G/A) mode is automatically armed when the A/T switch is in the ARM position and; the glideslope is captured (from the FCC) or the flap position is greater than zero. Actual go-around engagement occurs when a go-around switch on the thrust levers is pressed.

 (b)  
When the G/A mode and an autopilot channel are engaged, the thrust levers advance to achieve a 2000 fpm rate of climb as limited by the EPR REF. When the G/A mode is engaged with no autopilot engaged, the thrust levers advance to achieve the EPR REF. When the go around mode is operational, annunciation of GA appears on the EADI. In addition, the reference bug on the EPR indicator is driven by the TMC to the EPR REF value.

 

 (16)
 Autothrottle - Flare Retard (Fig. 17)


 (a)  Autothrottle flare retard occurs upon request from the FCCs when two or more A/P channels are engaged. The autothrottle must be engaged in the SPD mode. Flare occurs at 50 feet radio altitude.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 22-32-00
 ALL  ú ú 07 Page 30 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 自动飞行 AUTOFLIGHT 2(123)