(3) If nothing is found:
- replace the fuel return valve (Ref. AMM TASK 73-11-50-000-002) and (Ref. AMM TASK 73-11-50-400-002).
F 『 EEFF : ALL E ∞∞73-10-00∞∞∞∞∞∞∞∞∞∞Page 217
E E May 01/02 E E ECES
E F 『 E C F M E E E E 56 E E E (4) If the fault continues:
- replace the harness J7 (Ref. AMM TASK 73-21-50-000-040) and (Ref. AMM TASK 73-21-50-400-040).
(5) If the fault continues:
- replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM TASK 73-21-60-400-001).
B. Do a wet motoring test of the engine (Ref. AMM TASK 71-00-00-710-002) and check that the fault does not duplicate.
F 『 EEFF : ALL E ∞∞73-10-00∞∞∞∞∞∞∞∞∞∞Page 218
E E May 01/02 ERE
ECES
F 『
E C F M E
E E
E 56 E
E E
TASK 73-10-00-810-814
Failure of the FRV of the Engine 2 in the Open Position, on Channel A
1. Possible Causes
_______________
R
- harness J7 R - fuel return valve R - ECU (4000KS)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R R AMM AMM AMM AMM AMM AMM AMM 71-00-00-710-002 73-11-50-000-002 73-11-50-400-002 73-21-50-000-040 73-21-50-400-040 73-21-60-000-001 73-21-60-400-001
R ASM 73-25/18
3. Fault Confirmation__________________
R R A. Not applicable.
4. Fault Isolation_______________
Wet Motoring Check
Removal of the Fuel Return Valve (FRV)
Installation of the Fuel Return Valve
Removal of the HJ7 Harness
Installation of the HJ7 Harness
Removal of the Electronic Control Unit (ECU)(4000KS)
Installation of the Electronic Control Unit
(ECU)(4000KS)
R A. The fault is generated when the fuel return valve fails to reach the
R closed position when commanded by the ECU.
R (1) Inspect the harness J7 and associated connector for sign of damage or
R contamination (Ref. ASM 73-25/18).
R Pay particular attention to pins 14 and 31 on the harness connector
R to the ECU and to pins 3 and 4 on the harness connector to the fuel
R return valve. Defective contacts on those connectors may give an
R erroneous indication of the fuel return valve position switches.
R (2) If damage is found:
R - replace the harness J7 (Ref. AMM TASK 73-21-50-000-040) and (Ref.
R AMM TASK 73-21-50-400-040).
F 『
∞∞73-10-00∞∞∞∞∞∞∞∞∞∞Page 219
EEFF : ALL E
E E Feb 01/01
E E
ECES E
F 『
E C F M E
E E
E 56 E
E E
R (3) If nothing is found:
R - replace the fuel return valve (Ref. AMM TASK 73-11-50-000-002) and
R (Ref. AMM TASK 73-11-50-400-002).
R (4) If the fault continues:
R - replace the harness J7 (Ref. AMM TASK 73-21-50-000-040) and (Ref.
R AMM TASK 73-21-50-400-040).
R (5) If the fault continues:
R - replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref.
R AMM TASK 73-21-60-400-001).
R
R B. Do a wet motoring test of the engine (Ref. AMM TASK 71-00-00-710-002) and
R check that the fault does not duplicate.
R
F 『 EEFF : ALL E ∞∞73-10-00∞∞∞∞∞∞∞∞∞∞Page 220
E E Feb 01/01 E E ECES
E
F 『
E C F M E
E E
E 56 E
E E
TASK 73-10-00-810-815
Failure of the FRV of the Engine 1 in the Open Position, on Channel B
1. Possible Causes
_______________
R
- harness J8 R - fuel return valve R - ECU (4000KS)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R AMM AMM AMM AMM AMM AMM AMM 71-00-00-710-002 73-11-50-000-002 73-11-50-400-002 73-21-50-000-041 73-21-50-400-041 73-21-60-000-001 73-21-60-400-001
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 发动机燃油和控制 1(44)
