- Repeat the fault isolation process if the fault continues.
F 『 EEFF : ALL E ∞∞73-20-00∞∞∞∞∞∞∞∞∞∞Page A236
E E Aug 01/05 ERE
ECES R **ON A/C 106-149, 155-199, 208-299, 301-399, 401-499,
F 『
E C F M E
E E
E 56 E
E E
TASK 73-20-00-810-923
loss of the T12 Sensor Signal through the two Channels on Engine 1
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
73-20-00-810-861 Loss of T12 Sensor Signal through the Channel A on Engine 1 73-20-00-810-863 Loss of T12 Sensor Signal through the Channel B on Engine 1 AMM 73-29-00-710-040 Operational Test of the FADEC on the ground (with Engine Motoring)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the FADEC 1A and 1B on the ground (with engine motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. If the test gives the maintenance messages T12 SNSR, J9, ECU and T12 SNSR, J10, ECU:
- do the following troubleshooting procedures (Ref. TASK 73-20-00-810-861) and (Ref. TASK 73-20-00-810-863).
F 『R EEFF : 106-149, 155-199, 208-299, 301-399, E ∞∞73-20-00∞∞∞∞∞∞∞∞∞∞Page A237
E E401-499, Aug 01/05 E E ECES
E TASK 73-20-00-810-924
F 『
E C F M E
E E
E 56 E
E E
loss of the T12 Sensor Signal through the two Channels on Engine 2
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
73-20-00-810-862 Loss of T12 Sensor Signal through the Channel A on Engine 2 73-20-00-810-864 Loss of T12 Sensor Signal through the Channel B on Engine 2 AMM 73-29-00-710-040 Operational Test of the FADEC on the ground (with Engine Motoring)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the FADEC 2A and 2B on the ground (with engine motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. If the test gives the maintenance messages T12 SNSR, J9, ECU and T12 SNSR, J10, ECU:
- do the following troubleshooting procedures (Ref. TASK 73-20-00-810-862) and (Ref. TASK 73-20-00-810-864).
F 『R EEFF : 106-149, 155-199, 208-299, 301-399, E ∞∞73-20-00∞∞∞∞∞∞∞∞∞∞Page A238
E E401-499, Aug 01/05 E E ECES
E TASK 73-20-00-810-925
F 『
E C F M E
E E
E 56 E
E E
Loss of the T25 Sensor Signal through the two Channels on Engine 1
1. Possible Causes
_______________
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
73-20-00-810-853 Loss of the T25 Sensor Signal through the Channel A on Engine 1 73-20-00-810-855 Loss of the T25 Sensor Signal through the Channel B on Engine 1 AMM 73-29-00-710-040 Operational Test of the FADEC on the ground (with Engine Motoring)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the FADEC 1A and 1B on the ground (with engine motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. If the test gives the maintenance messages T25 SNSR, J11, ECU and T25 SNSR, J12, ECU:
- do the following troubleshooting procedures (Ref. TASK 73-20-00-810-853) and (Ref. TASK 73-20-00-810-855).
F 『R EEFF : 106-149, 155-199, 208-299, 301-399, E ∞∞73-20-00∞∞∞∞∞∞∞∞∞∞Page A239
E E401-499, Aug 01/05 E E ECES
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 发动机燃油和控制 1(119)
