- replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM TASK 73-21-60-400-001).
B. Do the test given in Para. 3.A.
(1) No additional maintenance action is required if the fault is not confirmed.
(2) Repeat the fault isolation procedure if the fault continues.
F 『 EEFF : ALL E ∞∞73-20-00∞∞∞∞∞∞∞∞∞∞Page A275
E E Aug 01/05 ERE
ECES
F 『
E C F M E
E E
E 56 E E E TASK 73-20-00-810-952
Failure of the ECU PS3 Pressure Sensor - Engine 2 - Channel B
1. Possible Causes
_______________
- ECU (4000KS)
- PS3 line
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 72-00-00-200-026 Inspection/Check of the PS3 Line AMM 72-00-00-220-001 Inspection of the PS3 Line Connections AMM 73-21-60-000-001 Removal of the Electronic Control Unit (ECU) AMM 73-21-60-400-001 Installation of the Electronic Control Unit (ECU) AMM 73-29-00-710-040 Operational Test of the FADEC on the Ground (with
Engine non Motoring)
3. Fault Confirmation
__________________
A. Do the operational test of the FADEC 2B on the ground (with engine non motoring) (Ref. AMM TASK 73-29-00-710-040).
4. Fault Isolation
_______________
A. This failure message is generated if the PS3 line is leaking, blocked or an internal ECU processing error has occurred.
(1) If the failure message ECU, PS3 SNSR LINE is not confirmed:
(a) Inspect PS3 line:
- do a visual check of the PS3 line for dents, cracks, wear and weep holes free from obstruction (Ref. AMM TASK 72-00-00-200-026) and to make sure connections are properly tightened and in place (Ref. AMM TASK 72-00-00-220-001).
1 If damage is found:
_
- replace or retighten PS3 line (Ref. AMM TASK 72-00-00-220-001).
2 If no damage is found:
_ - no maintenance action is required.
F 『 EEFF : ALL E ∞∞73-20-00∞∞∞∞∞∞∞∞∞∞Page A276
E E Aug 01/05 ERE
ECES
F 『
E C F M E
E E
E 56 E
E E
(2) If the failure message ECU, PS3 SNSR LINE is not confirmed, but is repetitive:
(a) Replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM TASK 73-21-60-400-001).
(b) If the fault continues:
- inspect PS3 line.
(3) If the failure message ECU, PS3 SNSR LINE is confirmed:
1_ Do a visual check of the PS3 line for dents, cracks, wear and
weep holes free from obstruction (Ref. AMM TASK 72-00-00-200-
026) and to make sure connections are properly tightened and
in place (Ref. AMM TASK 72-00-00-220-001).
- replace or retighten PS3 line (Ref. AMM TASK 72-00-00-220-
001) as required.
- replace the ECU (4000KS) (Ref. AMM TASK 73-21-60-000-001) and (Ref. AMM TASK 73-21-60-400-001).
B. Do the test given in Para. 3.A.
(1) No additional maintenance action is required if the fault is not confirmed.
(2) Repeat the fault isolation procedure if the fault continues.
F 『 EEFF : ALL E ∞∞73-20-00∞∞∞∞∞∞∞∞∞∞Page A277
E E Aug 01/05 ERE
ECES
F 『
E C F M E
E E
E 56 E
E E
TASK 73-20-00-810-953
Loss of the P25 Sensor Signal on Engine 1
1. Possible Causes
_______________
- ECU (4000KS)
- P25 sensor and sense line
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 73-21-60-000-001 Removal of the Electronic Control Unit (ECU)
AMM 73-21-60-400-001 Installation of the Electronic Control Unit (ECU)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 发动机燃油和控制 1(134)
