Undemanded Steering During Taxi
WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______
START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
WARNING : LET THE BRAKES AND THE WHEELS BECOME COOL BEFORE YOU GO NEAR THE
_______ LANDING GEAR. DO NOT APPLY A LIQUID OR GAS FIRE EXTINGUISHER DIRECTLY ON A HOT WHEEL OR BRAKE UNIT. THIS COULD CAUSE AN EXPLOSION.
1. Possible Causes
_______________
R
- XMTR UNIT-N/W STRG HANDWHEEL,CAPT (1GC)
- XMTR UNIT-N/W STRG HANDWHEEL,F/O (2GC) R - ELAC-1 (2CE1) R - ELAC-2 (2CE2)
- XDCR UNIT-PEDAL POS, L (25CE1)
- XDCR UNIT-PEDAL POS, R (25CE2) R - BSCU (10GG)
- steering servovalve R - adjustment of the nose wheel steering "zero" position
- NLG torque link plays R
- Nose Wheel Steering gearbox
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) R JT2000AIRBUS 1 NOSE WHEEL ALIGNMENT TOOL
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞32-51-00∞∞∞∞∞∞∞∞∞∞Page 246
Aug 01/05 CES
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004 USA MIL-PRF-23827 TYPE I
SYNTH.ESTER BASED GREASE HIGH PRESSURE
(Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 05-51-16-200-001 Inspection After Brake Overheat AMM 07-11-00-581-003 Lifting of the Aircraft at Forward Jacking Point, MLG
Wheels on the Ground AMM 07-12-00-582-001 Jacking for Nose Gear Wheel Change AMM 09-10-00-584-002 Towing with the Nose Gear from the Front AMM 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power AMM 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power
AMM 27-21-00-820-003 Adjustment of the Rudder Mechanical Control
AMM 27-93-34-000-001 Removal of the ELAC (2CE1,2CE2)
AMM 27-93-34-400-001 Installation of the ELAC (2CE1,2CE2)
AMM 29-10-00-863-001 Pressurize the Green Hydraulic System
R AMM 29-10-00-863-002 Pressurize the Yellow Hydraulic System AMM 29-10-00-864-001 Depressurize the Green Hydraulic System R AMM 29-10-00-864-002 Depressurize the Yellow Hydraulic System AMM 31-32-00-860-009 Procedure to Get Access to the SYSTEM REPORT/TEST/L/G
Page AMM 32-21-00-200-002 General Visual Inspection of the Nose Landing Gear AMM 32-21-00-200-003 Check Torque Links for Excessive Play AMM 32-41-00-210-002 Inspection/Check of the Wheels and Tires AMM 32-41-00-210-003 Inspection/Check of the Pressure of Tires AMM 32-42-34-000-001 Removal of the Braking/Steering Control Unit (BSCU)
(10GG) AMM 32-42-34-400-001 Installation of the Braking/Steering Control Unit (BSCU) (10GG) AMM 32-51-00-220-001 Check of the NWS Zero Position (with the Nose Wheel Alignment Tool)
AMM 32-51-00-820-001 Adjustment of the NWS "Zero" Position with the Adjusting Tool F26630200 for A/C with NWS Sensor (3GC,4GC) P/N C24763000, Rudder Trim Angle as Reference
R AMM 32-51-00-820-001 Adjustment of the NWS "Zero" position for A/C with R NWS Sensor Box (3GC,4GC) P/N E21336000, Rudder Trim R Angle as Reference -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 32-51-00-820-002
R AMM 32-51-00-820-002
R
R
AMM 32-51-00-820-003
R AMM 32-51-00-820-003
R
R
AMM 32-51-11-000-001
AMM 32-51-11-400-001
R AMM 32-51-19-000-001
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 起落架 LANDING GEAR 2(110)
