R **ON A/C 106-149, 221-299, 401-499,
A. If the test gives the maintenance message ELAC1(2CE1)/BSCU(10GG):
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring from the BSCU (10GG), pins AA/15J, 15H, 6J, 6B to the first terminal block (Ref. ASM 32-51/01).
**ON A/C ALL
B. Do the test given in Para. 3.A.
TASK 32-51-00-810-808
Loss of the Signal from the ELAC 1 to the BSCU (identified by the BSCU-B)
1. Possible Causes
_______________
- BSCU (10GG)
- wiring from the BSCU (10GG), pins AA/15B, 15C, 6J, 6B to the first terminal block
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 32-42-34-000-001 Removal of the Braking/Steering Control Unit (BSCU) (10GG) AMM 32-42-34-400-001 Installation of the Braking/Steering Control Unit
(BSCU) (10GG)
AMM 32-46-00-740-001 BITE Test of the BSCU
ASM 32-51/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the BSCU (Ref. AMM TASK 32-46-00-740-001).
4. Fault Isolation
_______________
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 301-399,
A. If the test gives the maintenance message BSCU : NO DATA FROM ELAC1:
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring from the BSCU (10GG), pins AA/15B, 15C, 6J, 6B to the first terminal block (Ref. ASM 32-51/01).
R **ON A/C 106-149, 221-299, 401-499,
A. If the test gives the maintenance message ELAC1(2CE1)/BSCU(10GG):
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring from the BSCU (10GG), pins AA/15B, 15C, 6J, 6B to the first terminal block (Ref. ASM 32-51/01).
**ON A/C ALL
B. Do the test given in Para. 3.A.
TASK 32-51-00-810-809
Loss of the Signal from the ELAC 2 to the BSCU (identified by the BSCU-A)
1. Possible Causes
_______________
- BSCU (10GG)
- wiring from the BSCU (10GG), pins AA/14H, 14J, 7B, 7J to the first terminal block
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 32-42-34-000-001 Removal of the Braking/Steering Control Unit (BSCU) (10GG) AMM 32-42-34-400-001 Installation of the Braking/Steering Control Unit
(BSCU) (10GG)
AMM 32-46-00-740-001 BITE Test of the BSCU
ASM 32-51/01
3. Fault Confirmation
__________________
A. Test
(1) Do the BITE test of the BSCU (Ref. AMM TASK 32-46-00-740-001).
4. Fault Isolation
_______________
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 301-399,
A. If the test gives the maintenance message BSCU : NO DATA FROM ELAC2:
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring from the BSCU (10GG), pins AA/14H, 14J, 7B, 7J to the first terminal block (Ref. ASM 32-51/01).
R **ON A/C 106-149, 221-299, 401-499,
A. If the test gives the maintenance message ELAC2(2CE2)/BSCU(10GG):
- replace the BSCU (10GG) (Ref. AMM TASK 32-42-34-000-001) and (Ref. AMM TASK 32-42-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring from the BSCU (10GG), pins AA/14H, 14J, 7B, 7J to the first terminal block (Ref. ASM 32-51/01).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 起落架 LANDING GEAR 2(101)
