(5) TORQUE nuts (35 and 80) to between 100 and 110 lbf.in (1.13 and 1.24 m.daN).
(6) Install tube cap assembly (70 and 135) on drain tube (75 and 140). TORQUE to between 135 and 145 lbf.in (1.52 and 1.63 m.daN).
F 『 EEFF : ALL E Page 40773-11-31
E E Aug 01/03 E E ECES E Subtask 73-11-31-410-052
F 『
E C F M E
E E
E 56-5B E
E E
B. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Close the thrust reverser doors (Ref. TASK 78-36-00-410-040): FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR
Subtask 73-11-31-440-051
C. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041). Subtask 73-11-31-710-051
D. Do a minimum idle check (Ref. TASK 71-00-00-710-006).
5. Close-up
________ Subtask 73-11-31-410-053
A. Close Access
(1) Close the fan cowl doors (Ref. TASK 71-13-00-410-040):
FOR 1000EM1
437AL, 438AR
FOR 1000EM2
447AL, 448AR
(2) Remove the access platform(s).
(3) Remove the warning notice(s).
F 『 EEFF : ALL E Page 40873-11-31
E E Feb 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
FUEL NOZZLE - REMOVAL/INSTALLATION
__________________________________
TASK 73-11-40-000-002
Removal of the Fuel Nozzle
1. Reason for the Job
__________________
There are 20 fuel nozzles installed in each engine. This procedure can be used to remove one or more of the fuel nozzles.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific container 1 l (0.25 USgal)
No specific protective covers
No specific soft-jawed pliers
No specific warning notice
No specific access platform 1.5 m (4 ft. 11 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP2162 *
liquid wrench (Ref. 70-30-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
36-11-49-000-044 Removal of the High Pressure Tee Duct
36-11-49-000-045 Removal of the Lower High Pressure Duct
36-11-49-000-046 Removal of the Upper High Pressure Duct
36-11-49-000-048 Removal of the Fifth Stage Elbow Duct
71-13-00-010-040 Opening of the Fan Cowl Doors
72-00-00-200-025 Over-Serviceable-Limit Extensions
72-00-00-200-025 Over-Serviceable-Limit Extensions
R 72-42-00-290-041 Borescope Inspection of the Combustion Chamber Liners and Dome Area 72-42-00-290-041 Borescope Inspection of the Combustion Chamber Liners and Dome Area
F 『 EEFF : ALL E Page 40173-11-40
E E May 01/02 E E ECES E -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
F 『
E C F M E
E E
E 56-5B E
E E
R 72-42-00-290-041 Borescope Inspection of the Combustion Chamber Liners
R and Dome Area 74-21-10-000-002 Removal of the Right Ignition Lead 74-21-20-000-002 Removal of the Left Ignition Lead 74-21-30-000-002 Removal of the Spark Igniter 78-30-00-481-041 Make the Thrust Reverser Unserviceable for
Maintenance
78-36-00-010-040 Opening of the Thrust Reverser Doors
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 发动机燃油和控制 ENGINE FUEL AND CONTRO(54)
